Introduction to Groups, Invariants and Particles Frank W. K. Firk Professor Emeritus of Physics Yale University 2000  N  3 CONTENTS Preface 4 1. Introduction 5 2. Galois Groups 8 3. Some Algebraic Invariants 18 4. Some Invariants of Physics 25 5. Groups - Concrete and Abstract 37 6. Lie's Differential Equation, Infinitesimal Rotations, and Angular Momentum Operators 49 7. Lie's Continuous Transformation Groups 59 8. Properties of n-Variable, r-Parameter Lie Groups 67 9. Matrix Representations of Groups 72 10. Some Lie Groups of Transformations 83 11. Group Structure of Lorentz Transformations 96 12. Isospin 103 13. Groups and the Structure of Matter 116 14. Lie Groups and the Conservation Laws of the Physical Universe 145 15. Bibliography 149  4 PREFACE This introduction to Group Theory, with its emphasis on Lie Groups and their application to the study of symmetries of the fundamental constituents of matter, has its origin in a one-semester course that I taught at Yale University for more than ten years. The course was developed for Seniors, and advanced Juniors, majoring in the Physical Sciences. The students had generally completed the core courses for their majors, and had taken intermediate level courses in Linear Algebra, Real and Complex Analysis, Ordinary Linear Differential Equations, and some of the Special Functions of Physics. Group Theory was not a mathematical requirement for a degree in the Physical Sciences. The majority of existing undergraduate textbooks on Group Theory and its applications in Physics tend to be either highly qualitative or highly mathematical. The purpose of this introduction is to steer a middle course that provides the student with a sound mathematical basis for studying the symmetry properties of the fundamental particles. It is not generally appreciated by Physicists that continuous transformation groups (Lie Groups) originated in the Theory of Differential Equations. The infinitesimal generators of Lie Groups therefore have forms that involve differential operators and their commutators, and these operators and their algebraic properties have found, and continue to find, a natural place in the development of Quantum Physics. Guilford, CT. June, 2000.  5 1 INTRODUCTION The notion of geometrical symmetry in Art and in Nature is a familiar one. In Modern Physics, this notion has evolved to include symmetries of an abstract kind. These new symmetries play an essential part in the theories of the microstructure of matter. The basic symmetries found in Nature seem to originate in the mathematical structure of the laws themselves, laws that govern the motions of the galaxies on the one hand and the motions of quarks in nucleons on the other. In the Newtonian era, the laws of Nature were deduced from a small number of imperfect observations by a small number of renowned scientists and mathematicians. It was not until the Einsteinian era, however, that the significance of the symmetries associated with the laws was fully appreciated. The discovery of space-time symmetries has led to the widely held belief that the laws of Nature can be derived from symmetry, or invariance, principles. Our incomplete knowledge of the fundamental interactions means that we are not yet in a position to confirm this belief. We therefore use arguments based on empirically established laws and restricted symmetry principles to guide us in our search for the fundamental symmetries. Frequently, it is important to understand why the symmetry of a system is observed to be broken. In Geometry, an object with a definite shape, size, location, and orientation constitutes a state whose symmetry properties, or invariants, are to be studied. Any transformation that leaves the state unchanged in form is called a symmetry transformation. The  6 greater the number of symmetry transformations that a state can undergo, the higher its symmetry. If the number of conditions that define the state is reduced then the symmetry of the state is increased. For example, an object characterized by oblateness alone is symmetric under all transformations except a change of shape. In describing the symmetry of a state of the most general kind (not simply geometric), the algebraic structure of the set of symmetry operators must be given; it is not sufficient to give the number of operations, and nothing else. The law of combination of the operators must be stated. It is the algebraic group that fully characterizes the symmetry of the general state. The Theory of Groups came about unexpectedly. Galois showed that an equation of degree n, where n is an integer greater than or equal to five cannot, in general, be solved by algebraic means. In the course of this great work, he developed the ideas of Lagrange, Ruffini, and Abel and introduced the concept of a group. Galois discussed the functional relationships among the roots of an equation, and showed that they have symmetries associated with them under permutations of the roots. The operators that transform one functional relationship into another are elements of a set that is characteristic of the equation; the set of operators is called the Galois group of the equation. In the 1850's, Cayley showed that every finite group is isomorphic to a certain permutation group. The geometrical symmetries of crystals are described in terms of finite groups. These symmetries are discussed in many standard works (see bibliography) and therefore, they will not be discussed in this book.  7 In the brief period between 1924 and 1928, Quantum Mechanics was developed. Almost immediately, it was recognized by Weyl, and by Wigner, that certain parts of Group Theory could be used as a powerful analytical tool in Quantum Physics. Their ideas have been developed over the decades in many areas that range from the Theory of Solids to Particle Physics. The essential role played by groups that are characterized by parameters that vary continuously in a given range was first emphasized by Wigner. These groups are known as Lie Groups. They have become increasingly important in many branches of contemporary physics, particularly Nuclear and Particle Physics. Fifty years after Galois had introduced the concept of a group in the Theory of Equations, Lie introduced the concept of a continuous transformation group in the Theory of Differential Equations. Lie's theory unified many of the disconnected methods of solving differential equations that had evolved over a period of two hundred years. Infinitesimal unitary transformations play a key role in discussions of the fundamental conservation laws of Physics. In Classical Dynamics, the invariance of the equations of motion of a particle, or system of particles, under the Galilean transformation is a basic part of everyday relativity. The search for the transformation that leaves Maxwell's equations of Electromagnetism unchanged in form (invariant) under a linear transformation of the space-time coordinates, led to the discovery of the Lorentz transformation. The fundamental importance of this transformation, and its related invariants, cannot be overstated.  8 2 GALOIS GROUPS In the early 19th - century, Abel proved that it is not possible to solve the general polynomial equation of degree greater than four by algebraic means. He attempted to characterize all equations that can be solved by radicals. Abel did not solve this fundamental problem. The problem was taken up and solved by one of the greatest innovators in Mathematics, namely, Galois. 2.1. Solving cubic equations The main ideas of the Galois procedure in the Theory of Equations, and their relationship to later developments in Mathematics and Physics, can be introduced in a plausible way by considering the standard problem of solving a cubic equation. Consider solutions of the general cubic equation Ax3 + 3Bx2 + 3Cx + D =0, where A - D are rational constants. If the substitution y = Ax + B is made, the equation becomes y3+ 3Hy + G = 0 where H=AC-B2 and G=A2D-3ABC+2B3. The cubic has three real roots if G2 + 4H3 < 0 and two imaginary roots if G2 + 4H3 > 0. (See any standard work on the Theory of Equations). If all the roots are real, a trigonometrical method can be used to obtain the solutions, as follows: the Fourier series of cos3u is  9 cos3u = (3/4)cosu + (1/4)cos3u. Putting y = scosu in the equation y3 + 3Hy + G = 0 (s > 0), gives cos3u + (3H/s2)cosu + G/s3 = 0. Comparing the Fourier series with this equation leads to s = 2 V(-H) and cos3u = -4G/s3 If v is any value of u satisfying cos3u = -4G/s3, the general solution is 3u = 2nr ±3v, ( n is an integer). Three different values of cosu are given by u = v, and 27t/3 ± v. The three solutions of the given cubic equation are then scosv, and scos(2r/3 ± v). Consider solutions of the equation x3-3x+ 1 =0. In this case, H=-1 and G2+4H3=-3. All the roots are therefore real, and they are given by solving cos3u = -4G/s3 = -4(1/8) = -1/2 or, 3u = cos-'(-1/2). The values of u are therefore 27t/9, 47t/9, and 87t/9, and the roots are xi = 2cos(2r/9), x2 = 2cos(4r/9), and x3 = 2cos(8t/9).  10 2.2. Symmetries of the roots The roots x1, x2, and x3 exhibit a simple pattern. Relationships among them can be readily found by writing them in the complex form: 2cosO = el" + e-i" where 0 = 2 t/9, so that x1 = e" + e-i", X2= 2ie + e-2ie and X3 - 4ie +e-4i. Squaring these values gives x12 =x2+2, x22 =x3+2, and x32 =x1+2. The relationships among the roots have the functional form f(x1,x2,x3) = 0. Other relationships exist; for example, by considering the sum of the roots we find x1+ x22+ x2 - 2= 0 x2 + x32 + x3 - 2 =0, and x3 + x12+ x1 - 2=0. Transformations from one root to another can be made by doubling- the-angle, 0. The functional relationships among the roots have an algebraic symmetry associated with them under interchanges (substitutions) of the roots. If 0 is the operator that changes f(x1 ,x2 ,x3) into f(x2 ,x3 ,x1) then  11 Of(x1,x2,x3) - (X2,X3,X1), 02f(x1,x2,x3) - %13,x1,x2), and 03f(x1,x2,x3) - f(x1,x2,x3). The operator O = I, is the identity. In the present case, O(x1- x2 - 2) = (x22 - x3 - 2) = 0, and 02(X1- x2 - 2) = (x32 - x1 - 2) = 0. 2.3. The Galois group of an equation. The set of operators {I, 0, 02} introduced above, is called the Galois group of the equation x3 - 3x + 1 = 0. (It will be shown later that it is isomorphic to the cyclic group, C3). The elements of a Galois group are operators that interchange the roots of an equation in such a way that the transformed functional relationships are true relationships. For example, if the equation x1+x2 +x2-2=0 is valid, then so is O(x1+x2+ x 2)=x2+x32+x3-2=0. True functional relationships are polynomials with rational coefficients. 2.4. Algebraic fields We now consider the Galois procedure in a more general way. An algebraic solution of the general nth - degree polynomial aox" + a1x"-1 + ... an = 0 is given in terms of the coefficients a; using a finite number of operations (+ ,-,x ,+,V). The term "solution by radicals" is sometimes  12 used because the operation of extracting a square root is included in the process. If an infinite number of operations is allowed, solutions of the general polynomial can be obtained using transcendental functions. The coefficients ai necessarily belong to a field which is closed under the rational operations. If the field is the set of rational numbers, Q, we need to know whether or not the solutions of a given equation belong to Q. For example, if x2- 3 = 0 we see that the coefficient -3 belongs to Q, whereas the roots of the equation, xi = + V3, do not. It is therefore necessary to extend Q to Q', (say) by adjoining numbers of the form aV3 to Q, where a is in Q. In discussing the cubic equation x3 - 3x + 1 = 0 in 2.2, we found certain functions of the roots f(x1,x2,x3) = 0 that are symmetric under permutations of the roots. The symmetry operators formed the Galois group of the equation. For a general polynomial: x" + a1x"-1 + a2xn-2 + .. an = 0, functional relations of the roots are given in terms of the coefficients in the standard way xi+x2+x3 ... ... +xn =-ai xix2 + xix3 + ... x2X3 + x2X4 + ... + xn_1xn = a2 x1x2X3 + x2X3X4 + ... + xn-2xn-iXnx1- a3 x1x2X3 ... ... - Xn-1Xn = ±an. Other symmetric functions of the roots can be written in terms of these basic symmetric polynomials and, therefore, in terms of the coefficients. Rational symmetric functions also can be constructed  13 that involve the roots and the coefficients of a given equation. For example, consider the quartic x4 +a2x2 +a4=0. The roots of this equation satisfy the equations xi + x2 + x3 + x4 = 0 x1x2 + x1x3 + x1x4 + x2X3 + x2X4 + x3X4 = a2 xix2X3 + xix2X4 + xix3x4 + x2X3X4 = 0 x1x2X3X4 = a4. We can form any rational symmetric expression from these basic equations (for example, (3a43 - 2a2)/2a42 = f(x1,x2,x3,x4)). In general, every rational symmetric function that belongs to the field F of the coefficients, aj, of a general polynomial equation can be written rationally in terms of the coefficients. The Galois group, Gal, of an equation associated with a field F therefore has the property that if a rational function of the roots of the equation is invariant under all permutations of Gal, then it is equal to a quantity in F. Whether or not an algebraic equation can be broken down into simpler equations is important in the theory of equations. Consider, for example, the equation x6= 3. It can be solved by writing x3 = y, y2 = 3 or x = (/3)13 To solve the equation, it is necessary to calculate square and cube roots not sixth roots. The equation x6 = 3 is said to be compound (it can be broken down into simpler equations), whereas x2 = 3 is said to be atomic. The atomic properties of the Galois group of  14 an equation reveal the atomic nature of the equation, itself. (In Chapter 5, it will be seen that a group is atomic ("simple") if it contains no proper invariant subgroups). The determination of the Galois groups associated with an arbitrary polynomial with unknown roots is far from straightforward. We can gain some insight into the Galois method, however, by studying the group structure of the quartic x4 +a2x2 +a4=0 with known roots xi = ((-a2 +jp)/2)"2 , x2 = -xi x3 = ((-a2 - p)/2)"2 , x4 = -x3, where p = (a22 -4a4)12 The field F of the quartic equation contains the rationals Q, and the rational expressions formed from the coefficients a2 and a4. The relations xi + x2 = X3 + x4 = 0 are in the field F. Only eight of the 4! possible permutations of the roots leave these relations invariant in F; they are xix2X3X4 XiX2X3X4 XiX2X3 X4 {Pi= , P2= , P3=, xix2X3X4 XiX2X4X3 X2XiX3 X4 xix2x3x4 xix2x3x4 xix2x3 x4 x2 XiX4 X3 X3 X4XiX2 X3X4 X2 Xi  15 X1X2X3X4 X1X2X3X4 P7= , P8=. x4x3XiX2 X4X3X2Xi The set {P1,...P8} is the Galois group of the quartic in F. It is a subgroup of the full set of twentyfour permutations. We can form an infinite number of true relations among the roots in F. If we extend the field F by adjoining irrational expressions of the coefficients, other true relations among the roots can be formed in the extended field, F'. Consider, for example, the extended field formed by adjoining p (= (a22 - 4a4)) to F so that the relation x12 -x32 =PisinF'. We have met the relations xi = -x2 and x3 = -x4 so that x12 = x22 and x32= x4. Another relation in F' is therefore x2 - 2 The permutations that leave these relations true in F' are then {P1, P2, P3, P4}- This set is the Galois group of the quartic in F'. It is a subgroup of the set {P1,...P8}. If we extend the field F' by adjoining the irrational expression ((-a2 - p)/2)"2 to form the field F" then the relation x3- x4 = 2((-a2 -jp)/2)2 is in F". This relation is invariant under the two permutations {P1, P3}.  16 This set is the Galois group of the quartic in F". It is a subgroup of the set {P1, P2, P3, P4}- If, finally, we extend the field F" by adjoining the irrational ((-a2 + p)/2)"2 to form the field F"' then the relation xi- x2 = 2((-a2 -jp)/2)2 is in F"'. This relation is invariant under the identity transformation, P1 , alone; it is the Galois group of the quartic in F". The full group, and the subgroups, associated with the quartic equation are of order 24, 8, 4, 2, and 1. (The order of a group is the number of distinct elements that it contains). In 5.4, we shall prove that the order of a subgroup is always an integral divisor of the order of the full group. The order of the full group divided by the order of a subgroup is called the index of the subgroup. Galois introduced the idea of a normal or invariant subgroup: if H is a normal subgroup of G then HG-GH= [H, G] =0. (H commutes with every element of G, see 5.5). Normal subgroups are also called either invariant or self-conjugate subgroups. A normal subgroup H is maximal if no other subgroup of G contains H. 2.5. Solvability of polynomial equations Galois defined the group of a given polynomial equation to be either the symmetric group, Sn, or a subgroup of Sn, (see 5.6). The Galois method therefore involves the following steps: 1. The determination of the Galois group, Gal, of the equation.  17 2. The choice of a maximal subgroup of Hmax(l). In the above case, {P1, ...P8} is a maximal subgroup of Gal = S4. 3. The choice of a maximal subgroup of Hmax(l) from step 2. In the above case, {P1,..P4} = Hmax(2) is a maximal subgroup of Hmax(l)> The process is continued until Hmax = {P1} = {I}- The groups Gal, Hmax(1), ..,Hmax(k) = I, form a composition series. The composition indices are given by the ratios of the successive orders of the groups: g1/h(J), h()/h(2), ...h(k_1)/l. The composition indices of the symmetric groups S. for n = 2 to 7 are found to be: n Composition Indices 2 2 3 2, 3 4 2,3,2,2 5 2, 60 6 2, 360 7 2, 2520 We state, without proof, Galois' theorem: a polynomial equation can be solved algebraically if and only if its group is solvable. Galois defined a solvable group as one in which the composition indices are all prime numbers. Furthermore, he showed that if n > 4, the sequence of maximal normal subgroups is Sn, An, I, where An is the Alternating Group with (n!)/2 elements. The composition indices are then 2 and (n!)/2. For n > 4, however, (n!)/2 is not prime, therefore the groups Sn are not solvable for n > 4. Using Galois' Theorem, we see that it is therefore not possible to solve, algebraically, a general polynomial equation of degree n > 4.  18 3 SOME ALGEBRAIC INVARIANTS Although algebraic invariants first appeared in the works of Lagrange and Gauss in connection with the Theory of Numbers, the study of algebraic invariants as an independent branch of Mathematics did not begin until the work of Boole in 1841. Before discussing this work, it will be convenient to introduce matrix versions of real bilinear forms, B, defined by B = X=1m X;1ai xiy where x = [X1,X2,- --Xm], an m-vector, y = [y1,y2,---yn], an n-vector, and ar are real coefficients. The square brackets denote a column vector. In matrix notation, the bilinear form is B = xTAy where a11 . . ain1 A = . . . . ami, . amn The scalar product of two n-vectors is seen to be a special case of a bilinear form in which A = I. If x = y, the bilinear form becomes a quadratic form, Q: Q = xTAx. 3.1. Invariants of binary quadratic forms Boole began by considering the properties of the binary  19 quadratic form Q(x,y) = ax2 + 2hxy + by2 under a linear transformation of the coordinates x= Mx where x = [x,y], r. i j x'= [x',y'], and M = Lk 1 The matrix M transforms an orthogonal coordinate system into an oblique coordinate system in which the new x'- axis has a slope (k/i), and the new y'- axis has a slope (1/j), as shown: y y'I [i+jk+1] [0,1] [1, x' [0,0] [1,0] x The transformation of a unit square under M.  20 The transformation is linear, therefore the new function Q'(x',y') is a binary quadratic: Q'(x',y') = a'x'2 + 2h'x'y' + by'2. The original function can be written Q(x,y) = xTDx where 'a h D= h b and the determinant of D is detD = ab - h2, is the discriminant of Q. The transformed function can be written Q'(x',y') = x'TD'x' where a' h' D' = k h' b' and detD' = a'b' - h'2, the discriminant of Q'. Now, Q'(x' ,y') = (Mx)TD'Mx = xTMTD'Mx and this is equal to Q(x,y) if MTD'M = D. The invariance of the form Q(x,y) under the coordinate transformation M therefore leads to the relation  21 (detM)2detD' = detD because detMT = detM. The explicit form of this equation involving determinants is (il - jk)2(a'b' - h'2) = (ab - h2). The discriminant (ab - h2) of Q is said to be an invariant of the transformation because it is equal to the discriminant (a'b' - h'2) of Q', apart from a factor (il - jk)2 that depends on the transformation itself, and not on the arguments a,b,h of the function Q. 3.2. General algebraic invariants The study of general algebraic invariants is an important branch of Mathematics. A binary form in two variables is f(xi,x2) = aoxi" + a1x1"-1x2 + ...anx2" =Xa aixi"-x2 If there are three or four variables, we speak of ternary forms or quaternary forms. A binary form is transformed under the linear transformation M as follows f(x1,x2) => f'(x1',x2') = a0'x1'"+ a1'x1'"-lx2' + The coefficients a0, ai, a2,-..4 a',aia2 and the roots of the equation f(x1,x2) = 0 differ from the roots of the equation f'(xi',x2') = 0. Any function I(a0,ai ,...a1) of the coefficients of f that satisfies  22 r"I(ao',ai',...a.') = I(ao,ai,...an) is said to be an invariant of f if the quantity r depends only on the transformation matrix M, and not on the coefficients ai of the function being transformed. The degree of the invariant is the degree of the coefficients, and the exponent w is called the weight. In the example discussed above, the degree is two, and the weight is two. Any function, C, of the coefficients and the variables of a form f that is invariant under the transformation M, except for a multiplicative factor that is a power of the discriminant of M, is said to be a covariant of f. For binary forms, C therefore satisfies rwC(ao',ai',...an'; x1',x2') = C(ao,a1,...an; x1,x2). It is found that the Jacobian of two binary quadratic forms, f(x1,x2) and g(x1,x2), namely the determinant of/Ox1 of/Ox2 Og/Ox1 g/Ox2 where of/Ox1 is the partial derivative of f with respect to x1 etc., is a simultaneous covariant of weight one of the two forms. The determinant 82f/Ox12 O2f/Ox1Ox2 82g/Ox2Ox1 2g/0x22 called the Hessian of the binary form f, is found to be a covariant of weight two. A full discussion of the general problem of algebraic invariants is outside the scope of this book. The following example  23 will, however, illustrate the method of finding an invariant in a particular case. Example: To show that (a0a2 - a12)(a1a3 - a22) - (a0a3 - aia2)2/ is an invariant of the binary cubic f(x,y) = aox3 + 3aix2y + 3a2xy2 + a3y3 under a linear transformation of the coordinates. The cubic may be written f(x,y) = (a0x2+2a1xy+a2y2)x + (a1x2+2a2xy+a3y2)y = XTDx where x = [x,y], and Saox + a1y a1x + a2y D = a1x + a2y a2x + a3 Let x be transformed to x': x' = Mx, where 1 J M = s k 1 .- then f(x,y) = f'(x',y') if D =MTD'M. Taking determinants, we obtain  24 detD = (detM)2detD', an invariant of f(x,y) under the transformation M. In this case, D is a function of x and y. To emphasize this point, put detD = $(x,y) and detD'= $'(x',y') so that $(x,y) = (detM)2'(x',y') = (aox + a1y)(a2x + a3y) - (a1x + a27)2 = (a0a2 - a12)x2 + (a0a3 - aia2)xy + (aia3 -a222 = xTEx, where (a0a2 - a12) (a0a3 - a1a2)/2 E = L (a0a3 - a1a2)/2 (a1a3 - a22 ) Also, we have = XITE'x' = xTMTE'Mx therefore XTEx = (detM)2xTMTE'Mx so that E = (detM)2MTE'M. Taking determinants, we obtain  25 detE = (detM)4detE' = (aoa2 - a,2)(aia3 - a22) - (aa3 -aia2)2/ = invariant of the binary cubic f(x,y) under the transformation x' = Mx. 4 SOME INVARIANTS OF PHYSICS 4.1. Galilean invariance. Events of finite extension and duration are part of the physical world. It will be convenient to introduce the notion of ideal events that have neither extension nor duration. Ideal events may be represented as mathematical points in a space-time geometry. A particular event, E, is described by the four components [t,x,y,z] where t is the time of the event, and x,y,z, are its three spatial coordinates. The time and space coordinates are referred to arbitrarily chosen origins. The spatial mesh need not be Cartesian. Let an event E[t,x], recorded by an observer 0 at the origin of an x-axis, be recorded as the event E'[t',x'] by a second observer O', moving at constant speed V along the x-axis. We suppose that their clocks are synchronized at t = t' = 0 when they coincide at a common origin, x = x' = 0. At time t, we write the plausible equations t' = t and x' = x - Vt, where Vt is the distance traveled by 0' in a time t. These equations can be written E' = GE  26 where 1 0 ' G = -V 1 J G is the operator of the Galilean transformation. The inverse equations are t = t' and x = x' + Vt' or E = G-1E' where G-1 is the inverse Galilean operator. (It undoes the effect of G). If we multiply t and t' by the constants k and k', respectively, where k and k' have dimensions of velocity then all terms have dimensions of length. In space-space, we have the Pythagorean form x2 + y2 = r2 an invariant under rotations. We are therefore led to ask the question: is (kt)2 + x2 invariant under the operator G in space-time? Calculation gives (kt)2 + x2 = (k't')2 + x'2 + 2Vx't' + V2t'2 = (k't')2 + x'2 only if V = 0. We see, therefore, that Galilean space-time is not Pythagorean in its algebraic form. We note, however, the key role played by acceleration in Galilean-Newtonian physics: the velocities of the  27 events according to 0 and 0' are obtained by differentiating the equation x' = -Vt + x with respect to time, giving v'= -V + v, a plausible result, based upon our experience. Differentiating v' with respect to time gives dv'/dt' = a' = dv/dt = a where a and a' are the accelerations in the two frames of reference. The classical acceleration is invariant under the Galilean transformation. If the relationship v' = v - V is used to describe the motion of a pulse of light, moving in empty space at v = c - 3 x 108 m/s, it does not fit the facts. All studies of ultra high-speed particles that emit electromagnetic radiation show that v' = c for all values of the relative speed, V. 4.2. Lorentz invariance and Einstein's space-time symmetry. It was Einstein, above all others, who advanced our understanding of the true nature of space-time and relative motion. We shall see that he made use of a symmetry argument to find the changes that must be made to the Galilean transformation if it is to account for the relative motion of rapidly moving objects and of beams of light. He recognized an inconsistency in the Galilean- Newtonian equations, based as they are, on everyday experience. We shall restrict the discussion to non-accelerating, inertial frames. We have seen that the classical equations relating the events E and E' are E' = GE, and the inverse E = G-'E' where 1 0 1 0  28 These equations are connected by the substitution V + -V; this is an algebraic statement of the Newtonian Principle of Relativity. Einstein incorporated this principle in his theory. He also retained the linearity of the classical equations in the absence of any evidence to the contrary - equispaced intervals of time and distance in one inertial frame remain equispaced in any other inertial frame. He therefore symmetrized the space-time equations as follows: t' = t - Vx x' =-Vx + t (The zero in G is replaced by -V) Note, however, the inconsistency in the dimensions of the time- equation that has now been introduced: t'= t-Vx. The term Vx has dimensions of [L]2/[T], and not [T]. This can be corrected by introducing the invariant speed of light, c - a postulate in Einstein's theory that is consistent with experiment: ct' = ct - Vx/c All terms in the equation now have dimensions of length. Einstein went further, and introduced a dimensionless quantity y instead of the scaling factor of unity that appears in the Galilean equations of space-time. This factor must be consistent with all observations. The equations then become ct' = yct - I3yx x' = -3yct + yx, wherel3=V/c. These can be written E' = LE, where  29 7 -R7 L = , and E =[ct, x] L is the operator of the Lorentz transformation. The inverse equation is E = L-'E' where L-1 =. This is the inverse Lorentz transformation, obtained from L by changing I -- -(3 (or V -- -V); it has the effect of undoing the transformation L. We can therefore write LL-' = I, or - yy0 1, Equating elements gives y2 122 therefore, y = 1/x(1 - (2) (taking the positive root). 4.3. The invariant interval. Previously, it was shown that the space-time of Galileo and Newton is not Pythagorean in form. We now ask the question: is  30 Einsteinian space-time Pythagorean in form? Direct calculation leads to (ct)2 + (x)2 = y2(1 + 132)(ct')2 + 4 y2x'ct' +2(1 + ()x'2 ;d(ct')2 + (x')2 if p > 0. Note, however, that the difference of squares is an invariant under L: (ct)2 - (x)2 = (ct')2 -(x,)2 because y2(1 - (2) = 1. Space-time is said to be pseudo-Euclidean. The negative sign that characterizes Lorentz invariance can be included in the theory in a general way as follows. We introduce two kinds of 4-vectors x" = [x0, x', x2, X3], a contravariant vector, and x, = [x0, x1, x2, x3], a covariant vector, where x, = [x°,-x',-x2,_x3 The scalar product of the vectors is defined as x = (x0 x, x2, x3)L01,-x',-x2,-x3] = (x0)2 - ((x1)2 + (x2)2 + (x3)2) The event 4-vector is E" = [ct, x, y, z] and the covariant form is E, = [ct,-x,-y,-z]  31 so that the Lorentz invariant scalar product is ElITE, = (ct)2 - (x2 + y2 + z2). The vector x" transforms as x'" = Lx" where L is y -13y 0 0 -1y y 0 0 L= 0 0 1 0 0 0 0 1 This is the operator of the Lorentz transformation if the motion of 0' is along the x-axis of O's frame of reference. Important consequences of the Lorentz transformation are that intervals of time measured in two different inertial frames are not the same but are related by the equation At' = yAt where At is an interval measured on a clock at rest in O's frame, and distances are given by Al' = Al/y where Al is a length measured on a ruler at rest in O's frame. 4.4. The energy-momentum invariant. A differential time interval, dt, cannot be used in a Lorentz- invariant way in kinematics. We must use the proper time differential interval, dt, defined by (cdt)2 - dx2 = (cdt')2 - dx'2 - (cdt)2. The Newtonian 3-velocity is vN = dx/dt, dy/dt, dz/dt], and this must be replaced by the 4-velocity  32 V" = d(ct)/dt, dx/dt, dy/dt, dz/dt] = [d(ct)/dt, dx/dt, dy/dt, dz/dt]dt/dt = [yc ,YVN] The scalar product is then VMV, = (yc)2 - (YvN)2 = (yc)2(1 - (vN/C)2) = C2 (In forming the scalar product, the transpose is understood). The magnitude of the 4-velocity is |V"| = c, the invariant speed of light. In Classical Mechanics, the concept of momentum is important because of its role as an invariant in an isolated system. We therefore introduce the concept of 4-momentum in Relativistic Mechanics in order to find possible Lorentz invariants involving this new quantity. The contravariant 4-momentum is defined as: P" = mV" where m is the mass of the particle. (It is a Lorentz scalar, the mass measured in the frame in which the particle is at rest). The scalar product is P"P,= (cme)2. Now, P" = [myc, myvN] therefore, P"PP,= (myc)2 - (myvN)2. Writing M = ym, the relativistic mass we obtain  33 P"PJ,= (Mc)2 - (MvN)2 = (in)2. Multiplying throughout by c2 gives M2c4 - M2VN2 C2 = mc4 The quantity Mc2 has dimensions of energy; we therefore write E = Mc2 the total energy of a freely moving particle. This leads to the fundamental invariant of dynamics c2P"PP,= E2 - (pc)2 = E°2 where E = mc2 is the rest energy of the particle, and p is its relativistic 3-momentum. The total energy can be written: E=yE =E +T, where T = E(y - 1), the relativistic kinetic energy. The magnitude of the 4-momentum is a Lorentz invariant P=mc. The 4- momentum transforms as follows: P'" = LP". For relative motion along the x-axis, this equation is equivalent to the equations E' = yE - I3ycpx and cpx= -fyB + ycpx . Using the Planck-Binstein equations B = hv and  34 E = pxc for photons, the energy equation becomes v' = yv - 3yv =yv(1 -1() = v(1 - P)/(1 132)12 = v[(1 - f3)/(1 + f3)]1/2 This is the relativistic Doppler shift for the frequency v', measured in an inertial frame (primed) in terms of the frequency v measured in another inertial frame (unprimed). 4.5. The frequency-wavenumber invariant Particle-wave duality, one of the most profound discoveries in Physics, has its origins in Lorentz invariance. It was proposed by deBroglie in the early 1920's. He used the following argument. The displacement of a wave can be written y(t,r) = Acos(wt - ker) where w = 2nv (the angular frequency), Iki = 2t/X (the wavenumber), and r = [x, y, z] (the position vector). The phase (wt - ker) can be written ((w/c)ct - ker), and this has the form of a Lorentz invariant obtained from the 4-vectors E"[ct, r], and K"[w/c, k] where E" is the event 4-vector, and K" is the "frequency- wavenumber" 4-vector. deBroglie noted that the 4-momentum P" is connected to the event 4-vector E" through the 4-velocity V", and the frequency- wavenumber 4-vector K" is connected to the event 4-vector E" through the Lorentz invariant phase of a wave ((o/c)ct - ke r). He  35 therefore proposed that a direct connection must exist between P" and K"; it is illustrated in the following diagram: E"[ct,r] (Einstein) P"P,= inv. E"K,= Inv. (deBroglie) P"[E/c,p] [K'[w/c,k] (deBroglie) The coupling between P" and K' via E". deBroglie proposed that the connection is the simplest possible, namely, P" is proportional to K". He realized that there could be only one value for the constant of proportionality if the Planck- Einstein result for photons, E = hw/2t, is but a special case of a general result; it must be h/2t, where h is Planck's constant. Therefore, deBroglie proposed that P" oc Kt or P" = (h/2t)K". Equating the elements of the 4-vectors gives E = (h/2t)w and p = (h/27t)k .  36 In these remarkable equations, our notions of particles and waves are forever merged. The smallness of the value of Planck's constant prevents us from observing the duality directly; however, it is clearly observed at the molecular, atomic, nuclear, and particle level. 4.6. deBroglie's invariant. The invariant formed from the frequency-wavenumber 4-vector is K"KJ, = (o/c, k)[o/c,-k] = (w/c)2 - k2 = (wo/c)2, where w 0is the proper angular frequency. This invariant is the wave version of Einstein's energy- momentum invariant; it gives the dispersion relation o= 22- (kc)2. The ratio w/k is the phase velocity of the wave, v,. For a wave-packet, the group velocity vG is dw/dk; it can be obtained by differentiating the dispersion equation as follows: odo - kc2dk = 0 therefore, VG= dw/dk = kc2/w. The deBroglie invariant involving the product of the phase and group velocity is therefore v~vG = ( */k).(kc2/w) = c2. This is the wave-equivalent of Einstein's E = Mc2. We see that v~vG 2 = E/M  37 or, VG = E/Mv, = Ek/Mw = p/M = vN, the particle velocity. This result played an important part in the development of Wave Mechanics. We shall find in later chapters, that Lorentz transformations form a group, and that invariance principles are related directly to symmetry transformations and their associated groups 5 GROUPS - CONCRETE AND ABSTRACT 5.1 Some concrete examples The elements of the set {± 1, ±i}, where i = -/-1, are the roots of the equation x4 = 1, the "fourth roots of unity". They have the following special properties: 1. The product of any two elements of the set (including the same two elements) is always an element of the set. (The elements obey closure). 2. The order of combining pairs in the triple product of any elements of the set does not matter. (The elements obey associativity). 3. A unique element of the set exists such that the product of any element of the set and the unique element (called the identity) is equal to the element itself. (An identity element exists). 4. For each element of the set, a corresponding element exists such that the product of the element and its corresponding element (called the inverse) is equal to the identity. (An inverse element exists). The set of elements {±1, ±i} with these four properties is said to form a GROUP.  38 Here, the law of composition of the group is multiplication; this need not be the case. For example, the set of integers Z = {... -2, -1, 0, 1, 2, ... } forms a group if the law of composition is addition; in this group, the identity element is zero and the inverse of each integer is the integer with the same magnitude but with opposite sign. In a different vein, we consider the set of 4x4 matrices 1000 0001 0010 0100 {M}= 0100 , 1000 , 0001, 0010. 0010 0100 1000 0001 0001 l0010 0100 1000 If the law of composition is matrix multiplication, then {M} is found to obey: 1 -closure, 2 --associativity, and to contain: 3 --an identity, diag(1, 1, 1, 1), and 4 --inverses. The set {M}forms a group under matrix multiplication. 5.2. Abstract groups The examples given above illustrate the generality of the group concept. In the first example, the group elements are real and imaginary numbers, in the second, they are positive and negative integers, and in the third, they are matrices that represent linear operators (see later discussion). Cayley, in the mid-19th century, first emphasized this generality, and he introduced the concept of an abstract group G that is a collection of n distinct elements (...gi...) for  39 which a law of composition is given. If n is finite, the group is said to be a group of order n. The collection of elements must obey the four rules: 1. If gi, g E G then gn = gjegi E G V gi, g E G (closure) 2. gk(g gi) = (gkgJ)gi [omitting the composition symbole] (associativity) 3. 3 e E G such that gie = eg = gi V gi E G (an identity exists) 4. If gi E G then 3 gj-' E G such that g7'-gi = gigs' = e (an inverse exists). For finite groups, the group structure is given by listing all compositions of pairs of elements in a group table, as follows: e . g gj . <-(1st symbol, or operation, in pair) e . . gi . gg gg . g; .gg gg . gk . gkg gkgj If gigi = gigi V gi, gj E G, then G is said to be a commutative or abelian group. The group table of an abelian group is symmetric under reflection in the diagonal. A group of elements that has the same structure as an abstract group is a realization of the group. 5.3 The dihedral group, D3 The set of operations that leaves an equilateral triangle invariant under rotations in the plane about its center, and under reflections in the three planes through the vertices, perpendicular to the opposite sides, forms a group of six elements. A study of the structure  40 of this group (called the dihedral group, D3) illustrates the typical group-theoretical approach. The geometric operations that leave the triangle invariant are: Rotations about the z-axis (anticlockwise rotations are positive) RZ(0) (123) -- (123) = e, the identity RZ(2m/3)(123) -- (312) = a RZ(4/3)(123) -- (231) = a2 and reflections in the planes I, II, and III: R1 (123) -- (132) = b R11(123) -- (321) = c Rm11(123) -- (213)= d This set of operators is D3 = {e, a, a2, b, c, d}. Positive rotations are in an anticlockwise sense and the inverse rotations are in a clockwise sense, so that the inverse of e, a, a2 are e1= e, a-1= a2, and (a2)-1=a. The inverses of the reflection operators are the operators themselves: b-1= b, c-1 = c, and d- = d. The set D3 forms a group with the multiplication table: eaa2 bcd e eaa2 bcd a aa2 edbc a2 a2 e a c d b b b cdeaa2 c c dba2 ea d d bcaa2e  41 In reading the table, we follow the rule that the first operation is written on the right: for example, ca2 = b. A feature of the group D3 is that it can be subdivided into sets of either rotations involving {e, a, a2} or reflections involving {b, c, d}. The set {e, a, a2} forms a group called the cyclic group of order three, C3. A group is cyclic if all the elements of the group are powers of a single element. The cyclic group of order n, C1, is C= {e, a, a2, a3.,a"-1} where n is the smallest integer such that a"1= e, the identity. Since aka" -=a =e an inverse an-k exists. All cyclic groups are abelian. The group D3 can be broken down into a part that is a group C3, and a part that is the product of one of the remaining elements and the elements of C3. For example, we can write D3= C3 + bC3 , b 0 C3 = {e, a, a2} + {b, ba, ba2} = {e, a, a2} + {b, c, d} = cC3 = dC3. This decomposition is a special case of an important theorem known as Lagrange's theorem. (Lagrange had considered permutations of roots of equations before Cauchy and Galois). 5.4 Lagrange's theorem The order m of a subgroup H, of a finite group G, of order n is a factor (an integral divisor) of n. Let Gn = {g1= e, g2, g3, gn} be a group of order n, and let Hm= {hi= e, h2, h3 , hmn} be a subgroup of G1 of order m.  42 If we take any element gk of G. that is not in Hm, we can form the set of elements {gkhl, gkh2, gkh3, ...gkhm} -=8gHm- This is called the left coset of Hm with respect to gk. We note the important facts that all the elements of gkhj, j=1 to m are distinct, and that none of the elements gkhj belongs to Hm. Every element gk that belongs to G. but does not belong to Hm belongs to some coset gkHm so that G. forms the union of Hm and a number of distinct (non-overlapping) cosets. (There are (n - m) such distinct cosets). Each coset has m different elements and therefore the order n of G is divisible by m, hence n = Km, where the integer K is called the index of the subgroup Hm under the group G. We therefore write Gn = giHm + gj2Hm + gk3Hm + ....gvKHm where g G1 & Hm, 83 E G ( Hm, gj2Hm gx E G n (Hm, , gj2Hm ,83Hm, ...g-1, -iHm- The subscripts 2, 3, 4, ..K are the indices of the group. As an example, consider the permutations of three objects 1, 2, 3 (the group S3) and let Hm = C3 = {123, 312, 231}, the cyclic group of order three. The elements of S3 that are not in H3 are {132, 213, 321}. Choosing gk = 132, we obtain gkH3 = {132, 321, 213}, and therefore S3 = C3 + gk2C3,K = 2.  43 This is the result obtained in the decomposition of the group D3 if we make the substitutions e = 123, a = 312, a2 = 231, b = 132, c = 321, andd= 213. The groups D3 and S3 are said to be isomorphic. Isomorphic groups have the same group multiplication table. Isomorphism is a special case of homomorphism that involves a many-to-one correspondence. 5.5 Conjugate classes and invariant subgroups If there exists an element v E G such that two elements a, b E G are related by vav' = b, then b is said to be conjugate to a. A finite group can be separated into sets that are conjugate to each other. The class of G is defined as the set of conjugates of an element a E G. The element itself belongs to this set. If a is conjugate to b, the class conjugate to a and the class conjugate to b are the same. If a is not conjugate to b, these classes have no common elements. G can be decomposed into classes because each element of G belongs to a class. An element of G that commutes with all elements of G forms a class by itself. The elements of an abelian group are such that bab-' = aforalla,bEG, so that ba= ab. If Hm is a subgroup of Gn, we can form the set {aea', ah2a-l, ....ahma'} = aHma' where a E G11.  44 Now, aHma-1 is another subgroup of Hm in G. Different subgroups may be found by choosing different elements a of G. If, for all values of a E G aHma-1 = Hm (all conjugate subgroups of Hm in G are identical to Hm), then Hm is said to be an invariant subgroup in G. Alternatively, Hm is an invariant in G if the left- and right- cosets formed with any a E G are equal, i. e. ah1 = hka. An invariant subgroup Hm of G commutes with all elements of G. Furthermore, if hi E Hm then all elements ahia1 E Hm so that Hm is an invariant subgroup of G if it contains elements of G in complete classes. Every group G contains two trivial invariant subgroups, Hm = G and Hm = e. A group with no proper (non-trivial) invariant subgroups is said to be simple (atomic). If none of the proper invariant subgroups of a group is abelian, the group is said to be semisimple. An invariant subgroup Hm and its cosets form a group under multiplication called the factor group (written Gn/Hm) of Hm in G. These formal aspects of Group Theory can be illustrated by considering the following example: The group D3 = {e, a, a2, b, c, d} ~S3 = {123, 312, 231, 132, 321, 213}. C3 is a subgroup of S3: C3 = H3=-{e, a, a2} = {123, 312, 231}. Now, bH3 = {132, 321, 213} = H3b cH3 = {321, 213, 132} = H3c and dH3 = {213,132, 321} = H3d.  45 Since H3 is a proper invariant subgroup of S3, we see that S3 is not simple. H3 is abelian therefore S3 is not semisimple. The decomposition of S3 is S3 = H3 + bH3 = H3 + H3b. and, in this case we have H3b = H3c = H3d. (Since the index of H3 is 2, H3 must be invariant). The conjugate classes are e=e eae1 =ea=a aaa =ae=a a2 a(a2)-1= a2a2 = a bab-1 = bab = a2 cac- =cac=a2 dad-1 = dad = a2 The class conjugate to a is therefore {a, a2}. The class conjugate to b is found to be {b, c, d}. The group S3 can be decomposed by classes: S3={e}+ {a,a2}+{b,c,d}. S3 contains three conjugate classes. If we now consider Hm = {e, b} an abelian subgroup, we find aHm = {a,d}, Hma = {a.c}, a2Hm = {a2,c}, Hma2 = {a2, d}, etc. All left and right cosets are not equal: Hm = {e, b} is therefore not an invariant subgroup of S3. We can therefore write S3 = {e, b} + {a, d} + {a2, c} = Hmn + aHmn + a2Hm-.  46 Applying Lagrange's theorem to S3 gives the orders of the possible subgroups: they are order 1: {e} order 2: {e, d}; {e, c}; {e, d} order 3: {e, a, a2} (abelian and invariant) order 6: S3. 5.6 Permutations A permutation of the set { 1, 2, 3, ....,n} of n distinct elements is an ordered arrangement of the n elements. If the order is changed then the permutation is changed. The number of permutations of n distinct elements is n! We begin with a familiar example: the permutations of three distinct objects labeled 1, 2, 3. There are six possible arrangements; they are 123,312,231, 132,321,213. These arrangements can be written conveniently in matrix form: 123 123 123 JT1 = , JT2 , JT3 = 123 X312 231 123 123 123 1 3 2 3 2 1 2 1 3 J The product of two permutations is the result of performing one arrangement after another. We then find  47 and JT31T2=JTJ whereas JT40T5 = T3 and T5T4 = T2- The permutations n1, n2, 3 commute in pairs (they correspond to rotations in the dihedral group) whereas the remaining permutations do not commute (they correspond to reflections). A general product of permutations can be written sis2. . .s 1 2 . . n 1 2 . . n ti t2 . . .tn si s2 . . sn ti t2 . . to The permutations are found to have the following properties: 1. The product of two permutations of the set { 1, 2, 3, ...} is itself a permutation of the set. (Closure) 2. The product obeys associativity: (n)= nnk(JTJT), (not generally commutative). 3. An identity permutation exists. 4. An inverse permutation exists: 1 s 2 . . . s J-1 = 1 2 . . . n such that 1nn= nin = identity permutation. The set of permutations therefore forms a group  48 5.7 Cayley's theorem: Every finite group is isomorphic to a certain permutation group. Let Gn ={g1, g2, g3, . . .g} be a finite group of order n. We choose any element gi in Gn, and we form the products that belong to Gn: gigi1, gig2, 8183 ,-.-.-.818n- These products are the n-elements of G, rearranged. The permutation mi, associated with gi is therefore g1 g2 - - 2 J.= gigi gig2 g1g If the permutation of associated with gj is g1 g2 - - n JT. g g1 g;g2 ggn where gi g , then 81 82 - - n J.JT. = (gigi)gi (g g)g2 -" - (8j81)8n This is the permutation that corresponds to the element g gi of Gn. There is a direct correspondence between the elements of G1 and the n- permutations {m1, in2, - - -in}. The group of permutations is a  49 subgroup of the full symmetric group of order n! that contains all the permutations of the elements gi, g2,. . gn. Cayley's theorem is important in quantum systems in which the indistinguishability of the fundamental particles means that certain quantities must be invariant under the exchange or permutation of the particles. 6 LIE'S DIFFERENTIAL EQUATION, INFINITESIMAL ROTATIONS AND ANGULAR MOMENTUM OPERATORS Although the field of continuous transformation groups (Lie groups) has its origin in the theory of differential equations, we shall introduce the subject using geometrical ideas. 6.1 Coordinate and vector rotations A 3-vector v = [vX, vy, vZ] transforms into v' = [v ', vy', vZ'] under a general coordinate rotation R about the origin of an orthogonal coordinate system as follows: v'= R v, where i.i' j.i' k.i' R = i.j' j.j' k.j' i.k' j.k' k.k' cosOii- . . = cosOi- . . cosO6k- . cosOkk- in which i, j, k, i, j', k' are orthogonal unit vectors, along the axes, before and after the transformation, and the cosOii-'s are direction cosines.  50 The simplest case involves rotations in the x-y plane: vX- = cosOi- cos61 vX vy- cosi, cosO6j, v, = cosh sin$ vX = Re($)v -sink cos$ v, where Re($) is the coordinate rotation operator. If the vector is rotated in a fixed coordinate system, we have $ - -$ so that v' = R ,($v, where R ($) = cosh -sin$ sink cos$ 6.2 Lie's differential equation The main features of Lie's Theory of Continuous Transformation Groups can best be introduced by discussing the properties of the rotation operator R,($) when the angle of rotation is an infinitesimal. In general, R,($) transforms a point P[x, y] in the plane into a "new" point P'[x', y']: P' = R,($)P. Let the angle rotation be sufficiently small for us to put cos($) =1 and sin($) e-o$, in which case, we have  51 Ro)= 1 -o$ $ 1 and x'= x.1 - yo$= x - yo$ y'=xo$+y.1 =xo$+y Let the corresponding changes x -> x' and y -- y' be written x'=x+8x andy'=y+8y so that 8x= -yo and8y= xo$. We note that R,($)= 1 0 + 0 -1 o$ 0 1 1 0 = I + i o$ where i= 0 -1 = R,(m/2). 1 0 Lie introduced another important way to interpret the operator i = R,(m/2) that involves the derivative of R,($) evaluated at the identity value of the parameter, 4 = 0: d R,($)/d$ = -sin$ -cosh = 0 -1 = i $0 cosh -sink 1 0 $=o so that Ro)= I + dRj($)/d$4 $ +p=0  52 a quantity that differs from the identity I by a term that involves the infinitesimal, &$: this is an infinitesimal transformation. Lie was concerned with Differential Equations and not Geometry. He was therefore motivated to discover the key equation dR,($)/d$ = 0 -1 cosh -sin$ 1 0 sin$ cos$ = iR,($). This is Lie's differential equation. Integrating between $ = 0 and $ = $, we obtain f dR ($)/R,($) = if d$ I 0 so that ln(R,($)/I) = i$, or R,($) =Ie* the solution of Lie's equation. Previously, we obtained R,($) = Icos$ + isin$. We have, therefore Ie'* = Icos$ + isin$4. This is an independent proof of the famous Cotes-Euler equation. We introduce an operator of the form 0 = g(x, y, 8l/x, 8/y), and ask the question: does ox =Of(x, y; o$) ?  53 Lie answered the question in the affirmative; he found 8x = O(x&$) = (x8/By - yB/Bx)x&$ = -yo$ and 8y = O(y&$) = (x8/By - yB/Bx)yo$ = x&$. Putting x = x1 and y = x2, we obtain x= Xx&$ , i = 1,2 where X = 0 = (x18/Bx2 -2/ax1), the "generator of rotations" in the plane. 6.3 Exponentiation of infinitesimal rotations We have seen that R,($) = e4* and therefore RV(&$) = I + i$, for an infinitesimal rotation, &$ Performing two infinitesimal rotations in succession, we have RV 2(8&)= (I + i8) = I + 2iM& to first order, = R(25$). Applying Rt(&$) n-times gives Ra"(&$) = R,(no$) = e'n6* = ei* =R($)(asn -ooando0-- 0, the product n&$ -- 4). This result agrees, as it should, with the exact solution of Lie's differential equation. A finite rotation can be built up by exponentiation of infinitesimal rotations, each one being close to the identity. In general,  54 this approach has the advantage that the infinitesimal form of a transformation can often be found in a straightforward way, whereas the finite form is often intractable. 6.4 Infinitesimal rotations and angular momentum operators In Classical Mechanics, the angular momentum of a mass m, moving in the plane about the origin of a cartesian reference frame with a momentum p is L = r x p = rpsinrnZ where nZ is a unit vector normal to the plane, and $ is the angle between r and p. In component form, we have LZCl = xpy - ypx, where pX and p, are the cartesian components of p. The transition between Classical and Quantum Mechanics is made by replacing pX by -i(h/2m)8/ax (a differential operator) and p, by -i(h/2m)B/ay (a differential operator), where h is Planck's constant. The quantum operator is therefore LZQ = -i(h/2m)(x8/ay - yB/ax) =-i(h/2m)X so that X = iLZQ/(h/2n), and oxi = Xxi &$ = (2miLZQ/h)xi o$, i = 1,2. Let an arbitrary, continuous, differentiable function f(x, y) be transformed under the infinitesimal changes x'= x- y&$ y' =y+x$. Using Taylor's theorem, we can write  55 f(x', y')=f(x + 8x, y + 8y) =f(x-y&$,y+x&$) = f(x, y) + (af/Bx)ox + (af/By)oy = f(x, y) + $(-y(/ax) + x(/By))f(x, y) = I + 2mi&$L /h)f(x, y) = e2xi6 Lz/h f(x, y) = Rv(2L o$/h) f(x, y). The invariance of length under rotations follows at once: if f(x, y) = x2 + y2 then of/ax = 2x and of/ay = 2y, therefore f(x', y') = f(x, y) + 2xox + 2yoy = f(x, y) - 2x(y&$) + 2y(x&$) = f(x, y). This is the only form that is length-invariant under rotations. 6.5 3-dimensional rotations Consider three successive counterclockwise rotations about the x, y', and z' axes through angles [, 0, and $, respectively: Z z yI y about x y x x x X, X~, X 6Oabout y' x' x'' x' Z''_z'' y''' Sabout z'' x'', x''\  H 0 0 ICI + +n + 0 0 ,' II0 II o 11 ICI + w On u n ICI + tv On u n ICI + On u on _ 0 ) 11 CD 0 0 0-- 0-- II c I n0 ' C -e- -e o$ $ n 0 m0 0 p0 m E' O o * $ $0 0 J i on on  57 6.6 Algebra of the angular momentum operators The algebraic properties of the Y's are important. For example, we find that their commutators are: 0 WO0 00-1 0 0-1 000 [Y1, Y2] = 0 0 1 0 0 0 - 0 0 0 0 0 1 0 -1 0 0 0 1 0 00 -1 0 =-Y3 , Y1,Y3] = 2, and [Y2, Y3] = -Y1 These relations define the algebra of the Y's. In general, we have [Y, Yk]-± Yi= -k 1kYi where jk1 is the anti-symmetric Levi-Civita symbol. It is equal to +1 if jkl is an even permutation, -1 if jkl is an odd permutation, and it is equal to zero if two indices are the same. Motivated by the relationship between LZ and X in 2- dimensions, we introduce the operators Jk=-i(2/h)Yk,k =1,2,3. Their commutators are obtained from those of the Y's, for example [Y1, Y2] = -Y3 - [2iJ1/h, 2miJ2/h] = -2miJ3/h or -[J1, J2](2/h)2 = -2miJ3/h and therefore [1, J2] = ihJ3/2m. These operators obey the general commutation relation  58 [J;, Jk] = ihE kl J1 /2nm. The angular momentum operators form a "Lie Algebra". The basic algebraic properties of the angular momentum operators in Quantum Mechanics stem directly from this relation. Another approach involves the use of the differential operators in 3-dimensions. A point P[x, y, z] transforms under an infinitesimal rotation of the coordinates as follows P'[x', y', z'] = Re(o , 86, &$]P[x, y, z] Substituting the infinitesimal form of Re in this equation gives 8x=x'-x= y$-zo6 y=y'-y= -x&$ + zo 8z=z'-z= x8O-yo . Introducing the classical angular momentum operators: Licl, we find that these small changes can be written 3 5Xi = X Bak Xkx k=1 For example, if i = 1 8xi = 8x = 8i( zB/By - yB/Bz)x + 58(-z8/8x + x8/8z)x + &$( yB/8x - x8/By)x = -z~O + y&&$. Extending Lie's method to three dimensions, the infinitesimal form of the rotation operator is readily shown to be 3 Re(8i, O, o$) = I + 7X(BRc/aixl - "ac . i=1 A11ai's=0  59 7 LIE'S CONTINUOUS TRANSFORMATION GROUPS In the previous chapter, we discussed the properties of infinitesimal rotations in 2- and 3-dimensions, and we found that they are related directly to the angular momentum operators of Quantum Mechanics. Important algebraic properties of the matrix representations of the operators also were introduced. In this chapter, we shall consider the subject in general terms. Let xi, i = 1 to n be a set of n variables. They may be considered to be the coordinates of a point in an n-dimensional vector space, V. A set of equations involving the xi's is obtained by the transformations xi'=f(x1, x2,..xn: a1, a2,..ar), i = 1to n in which the set a1, a2, ...ar contains r-independent parameters. The set Ta, of transformations maps x - x'. We shall write x' = f(x; a) or x' = TaX for the set of functions. It is assumed that the functions fi are differentiable with respect to the x's and the a's to any required order. These functions necessarily depend on the essential parameters, a. This means that no two transformations with different numbers of parameters are the same. r is the smallest number required to characterize the transformation, completely. The set of functions f forms a finite continuous group if- 1. The result of two successive transformations x - x' - x' is equivalent to a single transformation x - x: x'= f(x'; b) = f(f(x; a); b)  60 = f(x; c) = f(x; x(a; b)) where c is the set of parameters cx = xx (a;b)k, = 1 tor, and 2. To every transformation there corresponds a unique inverse that belongs to the set: 3 a such that x = f(x'; a) = f(x'; a) We have TaTa- = Ta'Ta = I, the identity. We shall see that 1) is a highly restrictive requirement. The transformation x = f(x; ao) is the identity. Without loss of generality, we can take ao = 0. The essential point of Lie's theory of continuous transformation groups is to consider that part of the group that is close to the identity, and not to consider the group as a whole. Successive infinitesimal changes can be used to build up the finite change. 7.1 One-parameter groups Consider the transformation x - x' under a finite change in a single parameter a, and then a change x' + dx'. There are two paths from x - x' + dx'; they are as shown: x an "infinitesimal" 8a a fi 'te parameter change, a x' + dx' a +da x(a =0) a "differential"-''  61 We have x' + dx' = f(x; a + da) = f(f(x; a); 8a) = f(x'; 8a) The 1st-order Taylor expansion is dx' = 8f(x'; a)/Ba 8a = u(x') 8a a=0 The Lie group conditions then demand a + da = x(a; 8a). But x(a; 0) = a, (b = 0) therefore a + da = a + 8x(a; b)/8b 8a b=0 so that da = 8x(a; b)/8b 8a b=0 or 8a = A(a)da. Therefore dx' = u(x')A(a)da, leading to dx'/u(x') = A(a)da so that x' a f dx'/u(x') = fA(a)da = s x 0 (s = 0 -~ the identity).  62 We therefore obtain U(x') - U(x) = s. A transformation of coordinates (new variables) therefore transfers all elements of the group by the same transformation: a one- parameter group is equivalent to a group of translations. Two continuous transformation groups are said to be similar when they can be obtained from one another by a change of variable. For example, consider the group defined by xj a 0 xi x2' = 0 a2 x2 The identity coprresponds to a = 1. The infinitesimal transformation is therefore xi' (1+ a) 0 xi x2' = 0 (1 + 8a)2 x2 To 1st-order in 8a we have xi' = xi + x1a and x2' = x2 + 2x28a or 8xi = xioa and 8x2 = 2x28a. In the limit, these equations give dx1/xi = dx2/2x2 = da.  63 These are the differential equations that correspond to the infinitesimal equations above. Integrating, we have x1' a x2' a f dx1/x1 = f da and f dx2/2x2 = f da , x1 0 x2 0 so that and lnxi' - lnxi = a = ln(xi'/x1) ln(x2'/x2) = 2a = 21n(x1'/x1) or U' = (x2'/x1'2) = U = (x2/x12) Putting V = lnx1, we obtain V' = V + a and U' = U, the translation group. 7.2 Determination of the finite equations from the infinitesimal forms Let the finite equations of a one-parameter group GO) be xi =$(xix2;a) and x2'I= 19(x1, x2 ; a), and let the identity correspond to a = 0. We consider the transformation of f(xi, x2) to f(x', x2'). We expand f(x', x2') in a Maclaurin series in the parameter a (at definite values of xi and x2): f(xi', x2') = f(0) + f'(0)a + f'(0)a2/2! + ... where f(0) = f(x', x2')I a=0 = f(x1, x2),  64 and f'(0) = (df(x', x2')/dal a=O ={(Qf/axj')(dx'/da)+ (8f/8x2')(dx2'/da)}I|a=O ={(f/ax1')u(x1', x2') + (8f/8x2')v(x1', x2')}|a-o therefore f'(0) = {(u(/8x1) + v(/8x2))f}I a=O = Xf(x1, x2). Continuing in this way, we have f'(0) = {d2f(xi', x2')/da2}|a=o = X2f(x1, x2), etc.... The function f(x', x2') can be expanded in the series f(x', x2') = f(O) + af'(0) + (a2/2!)f'(O) + ... = f(x1, x2) + aXf + (a2/2!)X2f + ... Xf is the symbol for operating n-times in succession of f with X. The finite equations of the group are therefore xi' = x1 + aXx1 + (a2/2!)X2x1 + ... and x2' = x2 + aXx2 + (a2/2!)X2x2 +... If x1 and x2 are definite values to which xj'and x2' reduce for the identity a=0, then these equations are the series solutions of the differential equations dx'/u(x', x2') = dx2'/v(xi', x2') = da. The group is referred to as the group Xf. For example, let Xf = (x18/8x1 + x28/8x2)f then xi' = xi + aXxi + (a2/2!)X2f. = xi + a(x18/8xi + x28~/8X2)x1 +..  65 = xi + axi + (a2/2!)(x18/8xi + x28/8x2)xi + = xi + axi + (a2/2!)x1 + ... = x1(1 + a + a2/2! + ...) = xiea Also, we find x2' = x2ea. Putting b = ea, we have xi' = bxi and x2' = bx2. The finite group is the group of magnifications. If X = (x8/ay - yB/ax) we find, for example, that the finite group is the group of 2-dimensional rotations. 7.3 Invariant functions of a group Let Xf = (u/Bxi + v8/8x2)f define a one-parameter group, and let a = 0 give the identity. A function F(xi, x2) is termed an invariant under the transformation group GO) if F(x', x2') = F(xi, x2) for all values of the parameter, a. The function F(x', x2') can be expanded as a series in a: F(x', x2') = F(xi, x2) + aXF + (a2/2!)X(XF) + ... If F(x', x2') = F(xi, x2) = invariant for all values of a, it is necessary for XF = 0. This means that  66 {u(x1, x2)a/ax1 + v(x1, x2)a/ax2}F = 0. Consequently, F(x1, x2) = constant is a solution of dx1/u(x1, x2) = dx2/v(x1, x2) This equation has one solution that depends on one arbitrary constant, and therefore Go has only one basic invariant, and all other possible invariants can be given in terms of the basic invariant. For example, we now reconsider the invariants of rotations: The infinitesimal transformations are given by Xf = (xia/ax2 - X2a/aX1), and the differential equation that gives the invariant function F of the group is obtained by solving the characteristic differential equations dx1/x2 = d$, and dx2/x1 = -d$, so that dx1/x2 + dx2/x1 = 0. The solution of this equation is x12 + x22 = constant, and therefore the invariant function is F(xi, x2) = x12 + x22 All functions of x12 + x22 are therefore invariants of the 2- dimensional rotation group. This method can be generalized. A group Go in n-variables defined by the equation xj' = $(xi, x2, X3, ---Xn1; a), i = 1ito n,  67 is equivalent to a unique infinitesimal transformation Xf = u1(x1, x2, x3, ...xn)Xf/9x1 + ...un(x1, x2, x3, ...xn)9f/xn- If a is the group parameter then the infinitesimal transformation is xi' = xi + ui(x1, x2, ...xn)oa (i = 1to n), then, if E(xi, x2, ...xn) is a function that can be differentiated n-times with respect to its arguments, we have E(x', x2', ...xn') = E(x1, x2, ...xn) + aXE + (a2/2!)X2E + . Let (x1, x2, ...xn) be the coordinates of a point in n-space and let a be a parameter, independent of the xi's. As a varies, the point (x1, x2, ...xn) will describe a trajectory, starting from the initial point (x1, x2, ...xn). A necessary and sufficient condition that F(xi, x2, ...xn) be an invariant function is that XF = 0. A curve F = 0 is a trajectory and therefore an invariant curve if XF(x1, x2, x3, ...xn) = 0. 8 PROPERTIES OF n-VARIABLE, r-PARAMETER LIE GROUPS The change of an n-variable function F(x) produced by the infinitesimal transformations associated with r-essential parameters is: n dF = X (BF/8xi)dxi i= 1 where r dx = X uix(x)8ax , the Lie form. x=1 The parameters are independent of the x1's therefore we can write  68 r B dF = X 1a{X u i(x)(8/8xi)F} x=1 i=1 r = X taX,,F X=1 where the infinitesimal generators of the group are n X - uix(x)(8/8xi) , X= 1 to r. i= 1 The operator I + X Xoax X= 1 differs infinitesimally from the identity. The generators X, have algebraic properties of basic importance in the Theory of Lie Groups. The X,'s are differential operators. The problem is therefore one of obtaining the algebraic structure of differential operators. This problem has its origin in the work of Poisson (1807); he introduced the following ideas: The two expressions X1f = (u11B/Bx1 + u1jB/8x2)f and X2f = (u218/8x1 + u228/8x2)f where the coefficients uit are functions of the variables x1, x2, and f(x1, x2) is an arbitrary differentiable function of the two variables, are termed linear differential operators. The "product" in the order X2 followed by Xi is defined as  69 X1X2f = (u11a/ax1 + u12a/ax2)(u21af/ax1 + u2jiaf/axe) The product in the reverse order is defined as X2X~f = (u21a/ax1 + u22a/ax2)(u11af/ax1 + u1jiaf/ax2). The difference is XJX2f - X2X~f = X1u21af/ax1 + X1u2jiaf/axe - X2u11af/ax1 - X2u1jiaf/axe. = (X1u21 - Xu1a/x + (X1u22 - Xu2a/x L1X1,Xj1f. This quantity is called the Poisson operator or the commutator of the operators X 1f and X2f . The method can be generalized to include X = 1 to r essential parameters and i = 1 to n variables. The ath-linear operator is then Xa = uiaaf/axi nI =Xuiaaf/axi i= 1 (Sum over repeated indices). Lie's differential equations have the form ax/a,= uik(x)AkX~a) , i = 1 to n, X = 1 to r. Lie showed that (ackT/aap)uik = 0 in which uJOauT/axJ - u ,iu1/x = cki(a)uikx), so that the ckTO6's are constants. Furthermore, the commutators can be written LXp, X0] = ( ckp6uJk)9/9xJ  70 = CkpoXk. The commutators are linear combinations of the Xk's. (Recall the earlier discussion of the angular momentum operators and their commutators). The ckp's are called the structure constants of the group. They have the properties Ckpo = -Ckop c[pOcVylT +c cV6Tc,, + cVco = 0. Lie made the remarkable discovery that, given these structure constants, the functions that satisfy Bxi/ax= ukAkX(a) can be found. (Proofs of all the above important statements, together with proofs of Lie's three fundamental theorems, are given in Eisenhart's standard work Continuous Groups of Transformations, Dover Publications, 1961). 8.1 The rank of a group Let A be an operator that is a linear combination of the generators of a group, Xi: A = aX1 (sum over i), and let X = xX . The rank of the group is defined as the minimum number of commuting, linearly independent operators of the form A. We therefore require all solutions of [A, X] =0. For example, consider the orthogonal group, O*(3); here  71 A = aX i=lto3, and X = xX, j=lto3 so that [A, X] = ax [Xi, Xj] i, j = 1to 3 iX EijkXk . The elements of the sets of generators are linearly independent, therefore aixJ iJk =0 (sum over i, j,, k = 1, 2, 3) This equation represents the equation -a2 ai 0 xi 0 U3 0 -a2 x2 = 0 . 0 -a3 a20 x3 0 The determinant of a is zero, therefore a non-trivial solution of the xi's exists. The solution is given by xj = a (j = 1,2,3) so that A=X. O*(3) is a group of rank one. 8.2 The Casimir operator of O*(3) The generators of the rotation group O*(3) are the operators. Yk's, Discussed previously. They are related to the operators, Jk: Jk = -i(h/2)Y (k = 1, 2, 3). The matrix representations of the Y,'s are  72 0 0 0 0 0-' ' 0 1 0 Y1= 0 0 1 , Y2 = 0 0 0 , Y3 = -1 0 0. 0 -1 0 1 0 0 0 0 0 The square of the total angular momentum, J is 3 J2 = xj,2 1 = (h/2m)2 (Y12 + Y22 + Y32) = (h/2m)2(-21). Schur's lemma states that an operator that is a constant multiple of I commutes with all matrix irreps of a group, so that [Jk, J2] = 0 , k = 1,2 ,3. The operator J2 with this property is called the Casimir operator of the group O*(3). In general, the set of operators {C1} in which the elements commute with the elements of the set of irreps of a given group, forms the set of Casimir operators of the group. All Casimir operators are constant multiples of the unit matrix: C1 = a1I; the constants a1 are characteristic of a particular representation of a group. 9 MATRIX REPRESENTATIONS OF GROUPS Matrix representations of linear operators are important in Linear Algebra; we shall see that they are equally important in Group Theory. If a group of m x m matrices  73 DnC"" = {D ")(gi),. .(.Dek()(gk), ...Dn1m)(g)} can be found in which each element is associated with the corresponding element gk of a group of order n Gn = {gl,...gk,....g , and the matrices obey D ;("(g )D ("(gi) = Dif")(g gi), and D1(")(g1) = I, the identity, then the matrices Dek()(gk) are said to form an m-dimensional representation of G. If the association is one-to-one we have an isomorphism and the representation is said to be faithful. The subject of Group Representations forms a very large branch of Group Theory. There are many standard works on this topic (see the bibliography), each one containing numerous definitions, lemmas and theorems. Here, a rather brief account is given of some of the more important results. The reader should delve into the deeper aspects of the subject as the need arises. The subject will be introduced by considering representations of the rotation groups, and their corresponding cyclic groups. 9.1 The 3-dimensional representation of rotations in the plane The rotation of a vector through an angle $ in the plane is characterized by the 2 x 2 matrix cosh -sink R($) =. sink cosh  74 The group of symmetry transformations that leaves an equilateral triangle invariant under rotations in the plane is of order three, and each element of the group is of dimension two Gn~R 3 2>= { R(0), R(2m/3), R(4m/3)} = { 1 0 , -1/2 -V3/2 , -1/2 3/2 }. 0 1 V3/2 -1/2) -V3/2 -1/2 {123, 312, 231} = C3. These matrices form a 2-dimensional representation of C3 A 3-dimensional representation of C3 can be obtained as follows: Consider an equilateral triangle located in the plane and let the coordinates of the three vertices P1[x, y], P2[x', y'], and P3[x", y'] be written as a 3-vector P13 = LP1, P2, P3], in normal order. We introduce 3 x 3 matrix operators Di(3) that change the order of the elements of P13, cyclically. The identity is P13 = D1(3)P13, where D1(3) = diag(1, 1, 1). The rearrangement P13 - P23[P3, P1, P2] is given by P23 - D2(3)P13, where 0 0 1 D2(3) = 1 0 0, 0 1 0 and the rearrangement  75 P13 - P33LP2, P3, P1] is given by P33 =D3(3)P13 ,where 0 1 0 D3(3) = 0 0 1. 1 0 0 The set of matrices {D13)} -- {D1(3), D2(3), D3(3)} is said to form a 3- dimensional representation of the original 2-dimensional representation { R 3(2)}. The elements Di(3) have the same group multiplication table as that associated with C3. 9.2 The m-dimensional representation of symmetry transformations in d-dimensions Consider the case in which a group of order n Gn = {gi, g2,-...gk,-...gn} is represented by RnC")= { R in") R 2("".......Rn() where R n ~G w, and R km is an m x m matrix representation of gk. Let Pid be a vector in d-dimensional space, written in normal order: 1ld = 1 2, '''d , and let lm Pd, 2d,.'''' md  76 be an m-vector, written in normal order, in which the components are each d-vectors. Introduce the m x m matrix operator Dek()(gk) such that P im = D1 "G(g1) P im P 2m = D2 "G(g2) P im P km = D k()(gk) P im , k = 1 to m, the number of symmetry operations. P km is the kth (cyclic) permutation of P im , and Dek()(gk) is called the "m-dimensional representation of gk". Infinitely many representations of a given representation can be found, for, if S is a matrix representation, and M is any definite matrix with an inverse, we can form T(x) = MS(x)M-1, V x E G. Since T(xy) = MS(xy)M-1 = MS(x)S(y)M-1 = MS(x)M-'MS(y)M-1 = T(x)T(y), T is a representation of G. The new representation simply involves a change of variable in the corresponding substitutions. Representations related in the manner of S and T are equivalent, and are not regarded as different representations. All representations that are equivalent to S are equivalent to each other, and they form an infinite class. Two equivalent representations will be written S ~-T. 9.3 Direct sums If S is a representation of dimension s, and T is a representation of dimension t of a group G, the matrix  77 S(g) 0 P =,(gEG) 0 T(g) of dimension s + t is called the direct sum of the matrices S(g) and T(g), written P = S O T. Therefore, given two representations (they can be the same), we can obtain a third by adding them directly. Alternatively, let P be a representation of dimension s + t; we suppose that, for all x E G, the matrix P(x) is of the form A(x) 0 0 B(x) where A(x) and B(x) are s x s and t x t matrices, respectively. (The 0's are s x t and t x s zero matrices). Define the matrices S and T as follows: S(x) A(x) and T(x) B(x), V x E G. Since, by the group property, P(xy) = P(x)P(y), A(xy) 0 A(x) 0 A(y) 0 0 B(xy) 0 B(x) 0 B(y) A(x)A(y) 0 0 B(x)B(y)  78 Therefore, S(xy) = S(x)S(y) and T(xy) = T(x)T(y), so that S and T are representations. The representation P is said to be decomposable, with components S and T. A representation is indecomposable if it cannot be decomposed. If a component of a decomposable representation is itself decomposable, we can continue in this manner to decompose any representation into a finite number of indecomposable components. (It should be noted that the property of indecomposablity depends on the field of the representation; the real field must sometimes be extended to the complex field to check for indecomposability). A weaker form of decomposability arises when we consider a matrix of the form A(x) 0 P(x) = E(x) B(x) where A(x), and B(x) are matrices of dimensions s x s and t x t respectively and E(x) is a matrix that depends on x, and 0 is the s x t zero matrix. The matrix P, and any equivalent form, is said to be reducible. An irreducible representation is one that cannot be reduced. Every decomposable matrix is reducible (E(x) = 0), whereas a reducible representation need not be decomposable. If S and T are reducible, we can continue in this way to obtain a set of irreducible components. The components are determined uniquely, up to an equivalence. The set of distinct  79 irreducible representations of a finite group is (in a given field) an invariant of the group. The components form the building blocks of a representation of a group. In Physics, decomposable representations are generally referred to as reducible representations (reps). 9.4 Similarity and unitary transformations and matrix diagonalization Before discussing the question of the possibility of reducing the dimension of a given representation, it will be useful to consider some important results in the Theory of Matrices. The proofs of these statements are given in the standard works on Matrix Theory. (See bibliography). If there exists a matrix Q such that Q'AQ = B then the matrices A and B are related by a similarity transformation. If Q is unitary (QQt = I: Qt = (Q*)T, the hermitian conjugate) then A and B are related by a unitary transformation. If A' = Q-'AQ; B' = Q'BQ; C' = Q-'CQ... then any algebraic relation among A, B, C ...is also satisfied by A', B', C'... If a similarity transformation produces a diagonal matrix then the process is called diagonalization. If A and B can be diagonalized by the same matrix then A and B commute. If V is formed from the eigenvectors of A then the similarity transformation V-'AV will produce a diagonal matrix whose elements are the eigenvalues of A.  80 If A is hermitian then V will be unitary and therefore an hermitian matrix can always be diagonalized by a unitary transformation. A real symmetric matrix can always be diagonalized by an orthogonal transformation. 9.5 The Schur-Auerbach theorem This theorem states Every matrix representation of a finite group is equivalent to a unitary matrix representation Let G = {D1, D2, ....Dn} be a matrix group, and let D be the matrix formed by taking the sum of pairs of elements D = X DiDit i=1 where Dit is the hermitian conjugate of Di. Since Di is non-singular, each term in the sum is positive definite. Therefore D itself is positive definite. Let Ld be a diagonal matrix that is equivalent to D, and let Ld"i2 be the positive definite matrix formed by replacing the elements of Ld by their positive square roots. Let U be a unitary matrix with the property that Ld = UDU-1. Introduce the matrix S = Ld-1/2U, then SDiS-1 is unitary. (This property can be demonstrated by considering (SDiS-1)(SDiS-1), and showing that it is equal to the identity). S will transform the original matrix representation G into diagonal form. Every unitary matrix is diagonalizable, and therefore every matrix in every finite matrix representation can be diagonalized.  81 9.6 Schur's lemmas A matrix representation is reducible if every element of the representation can be put in block-diagonal form by a single similarity transformation. Invoking the result of the previous section, we need only discuss unitary representations. If G = {DCv)(R)} is an irreducible representation of dimension v of a group Gn, and {D([)(R)} is an irreducible representation of dimension [1of the same group, Gn, and if there exists a matrix A such that D(v)(R)A = AD(")(R) V R E G then either i) A = 0 or ii) A is a square non-singular matrix (so that v = [1) Let the [1columns of A be written c1, c2, ... c, then, for any matrices D(v) and D([), we have Dv)A = (D(v)ci, D(v)c2, ...D(v)c) and [1 AD([) = ( X D([)kick, X D([)k2ck, ...XD()k ck). k= 1 k= 1 k=1 therefore [ D(v)c -- DC kc k k=1 The t1c-vectors therefore span a space that is invariant under the irreducible set of v-dimensional matrices {DCv)}. The c-vectors are therefore the null-vector or they span a v-dimensional vector space.  82 The first case corresponds to A = 0, and the second to [1>_ v and A 0. In the second case, the hermitian conjugates DCv1t, ...Dlvlt and D"t, ... DCV) t also are irreducible. Furthermore, since D(v)i(R)A = AD(")i(R) D([t) tAt = AtDCv)1t, and, therefore, following the method above we find that v > [1. We must therefore have v = [1, so that A is square. Since the v-columns of A span a v-dimensional space, the matrix A is necessarily non- singular. As a corollary, a matrix D that commutes with an irreducible set of matrices must be a scalar matrix. 9.7 Characters If D(v)(R) and D([)(R) are related by a similarity transformation then D(v)(R) gives a representation of G that is equivalent to D([)(R). These two sets of matrices are generally different, whereas their structure is the same. We wish, therefore, to answer the question: what intrinsic properties of the matrix representations are invariant under coordinate transformations? Consider X [CD(R)C']i = CikDkl(R)Cl;1- i ikl 11X klDkl(R) k1 = X Dkk(R), the trace of D(R). k We see that the trace, or character, is an invariant under a change of  83 coordinate axes. We write the character as X(R) = X Di(R) Equivalent representations have the same set of characters. The character of R in the representation [1is written XW(R) or [!,; R]. The conjugate elements of G have the form S = URU-' so that D(R) = D(U)D(R)[D(R)]-1 therefore x(S) = X(R). We can describe G by giving its characters in a particular representation; all elements in a class have the same X. 10 SOME LIE GROUPS OF TRANSFORMATIONS We shall consider those Lie groups that can be described by a finite set of continuously varying essential parameters a1,...ar: xi' = fi(x1,... xn; a1,... ar) = f(x; a) . A set of parameters a exists that is associated with the inverse transformations: x =f(x'; a). These equations must be solvable to give the xi's in terms of the xi's. 10.1 Linear groups The general linear group GL(n) in n-dimensions is given by the set of equations xi'= ai x , i = 1 to n j=1  84 in which det Ias I # 0. The group contains n2 parameters that have values covering an infinite range. The group GL(n) is said to be not closed. All linear groups with n > 1 are non-abelian. The group GL(n) is isomorphic to the group of n x n matrices; the law of composition is therefore matrix multiplication. The special linear group of transformations SL(n) in n- dimensions is obtained from GL(n) by imposing the condition detl a I = 1. A functional relation therefore exists among the n2 - parameters so that the number of required parameters is reduced to (n2_1). 10.2 Orthogonal groups If the transformations of the general linear group GL(n) are such that X xi2 _ invariant , i= 1 then the restricted group is called the orthogonal group, 0(n), in n- dimensions. There are [n + n(n - 1)/2] conditions imposed on the n2 parameters of GL(n), and therefore there are n(n - 1)/2 essential parameters of 0(n). For example, in three dimensions x' = Ox ; 0= {03X3: OOT = I, detO = 1, as ER} where a11 a12 a13 O = a21 a22 a23 a31 a32 a33  85 We have x1'2 +x2-2 + x32 = x12 +x22 +x32 -invariant under 0(3). This invariance imposes six conditions on the original nine parameters, and therefore 0(3) is a three-parameter group. 10.3 Unitary groups If the xi's and the aid' s of the general linear group GL(n) are complex, and the transformations are required to leave xxt invariant in the complex space, then we obtain the unitary group U(n) in n- dimensions: U(n)= { Unxn: UUt = I, detU # 0, u E C}. There are 2n2 independent real parameters (the real and imaginary parts of the ai 's), and the unitary condition imposes n + n(n-1) conditions on them so the group has n2 real parameters. The unitary condition means that Xi Ia I2 = 1, and therefore lal12 _+1 or L°° s_-1. The set of transformations can therefore be split into four disconnected parts, labeled as follows: {L} = {L: detL=+1, L° >+1} {LT_} = {L: detL=-1, L° >+1} {L} = {L: detL = +1, L °<-1}, and {L} = {L: detL = -1, L °<-1}. The identity is in {LI,}. 11.4 Parity, time-reversal and orthochronous transformations Two discrete Lorentz transformations are i) the parity transformation P = {P: r -- -r, t -- t} = diag(1, -1, -1, -1), and  102 ii) the time-reversal transformation T ={T: r -- r, t -- -t} = diag(-1, 1,1, 1}. The disconnected parts of {L} are related by the transformations that involve P, T, and PT, as shown: PT LT. L, P T Connections between the disconnected parts of Lorentz transformations The proper orthochronous transformations are in the group LT,. It is not necessary to consider the complete set {L} of Lorentz transformations - we need consider only the subset {LI,} that forms a group by itself and either P, T, or PT combined. Experiments have shown clear violations under the parity transformation, P and violations under T have been inferred from experiment and theory, combined. However, not a single experiment has been carried out that shows a violation of the proper orthochronous transformations, {L I}  103 12 ISOSPIN Particles can be distinguished from one another by their intrinsic properties: mass, charge, spin, parity, and their electric and magnetic moments. In our on-going quest for an understanding of the true nature of the fundamental particles, and their interactions, other intrinsic properties, with names such as "isospin" and "strangeness", have been discovered. The intrinsic properties are defined by quantum numbers; for example, the quantum number a is defined by the eigenvalue equation A$ = a where A is a linear operator, $ is the wavefunction of the system in the zero-momentum frame, and a is an eigenvalue of A. In this chapter, we shall discuss the first of these new properties to be introduced, namely, isospin. The building blocks of nuclei are protons (positively charged) and neutrons (neutral). Numerous experiments on the scattering of protons by protons, and protons by neutrons, have shown that the nuclear forces between pairs have the same strength, provided the angular momentum and spin states are the same. These observations form the basis of an important concept - the charge-independence of the nucleon-nucleon force. (Corrections for the coulomb effects in proton-proton scattering must be made). The origin of this concept is found in a new symmetry principle. In 1932, Chadwick not only identified the neutron in studying the interaction of alpha-particles on beryllium nuclei but also showed  104 that its mass is almost equal to the mass of the proton. (Recent measurements give mass of proton = 938-27231(28) MeV/c2 and mass of neutron = 939-56563(28) MeV/c2) Within a few months of Chadwick's discovery, Heisenberg introduced a theory of nuclear forces in which he considered the neutron and the proton to be two "states" of the same object - the nucleon. He introduced an intrinsic variable, later called isospin, that permits the charge states (+, 0) of the nucleons to be distinguished. This new variable is needed (in addition to the traditional space-spin variables) in the description of nucleon- nucleon scattering. In nuclei, protons and neutrons behave in a remarkably symmetrical way: the binding energy of a nucleus is closely proportional to the number of neutrons and protons, and in light nuclei (mass number < 40), the number of neutrons can be equal to the number of protons. Before discussing the isospin of particles and nuclei, it is necessary to introduce an extended Pauli Exclusion Principle. In its original form, the Pauli Exclusion Principle was introduced to account for features in the observed spectra of atoms that could not be understood using the then current models of atomic structure: no two electrons in an atom can exist in the same quantum state defined by the quantum numbers n, £, m,, ms where n is the principal quantum number, ( is the orbital angular momentum  105 quantum number, m, is the magnetic quantum number, and ms is the spin quantum number. For a system of N particles, the complete wavefunction is written as a product of single-particle wavefunctions W(1, 2, ...N) = 9(1)9(2)...9(N). Consider this form in the simplest case - for two identical particles. Let one be in a state labeled Wa and the other in a state Wb. For identical particles, it makes no difference to the probability density I12 of the 2-particle system if the particles are exchanged: I'(1, 2)12 = I'(2, 1)12, (the W's are not measurable) so that, either W(2, 1) = W(1, 2) (symmetric) or W(2, 1) = -W(1, 2) (anti-symmetric). Let W1 = la(1)lb(2) (1an a, 2 in b) and Wu = la(2)li)(1) (2 in a, 1in b). The two particles are indistinguishable, therefore we have no way of knowing whether P1 or WP11 describes the system; we postulate that the system spends 50% of its time in IF1 and 50% of its time in III . The two-particle system is considered to be a linear combination of P1 and P11: we have, therefore, either Tsymm = (1 /V2){ a(1)l\(2) + ia(2)ib(1)} (BOSONS) or  106 Wantisym= (1/V2){4a(1)4b(2) - 4a(2)4'b(1)} (FERMIONS). (The coefficient (1/V2) normalizes the sum of the squares to be 1). Exchanging 1 H 2 leaves Wsymm unchanged, whereas exchanging particles 1 <>2 reverses the sign of WVantisymm - If two particles are in WS, both particles can exist in the same state with a = b. If two particles are in WAS , and a=b, we have WAS =0 - they cannot exist in the same quantum state. Electrons (fermions, spin = (1/2)h) are described by anti-symmetric wavefunctions. We can now introduce a more general Pauli Exclusion Principle. Write the nucleon wavefunction as a product: W(x, q) = 9() where x = X(r, s) in which r is the space vector, s is the spin, and q is a charge or isospin label. For two nucleons, we write W(X1, q1; X2' q2), for two protons: W2p = 1(x1, X2)$N(P1)N(P2), for two neutrons: W2n = 2(X1, X2)$N(nl)N(n2), and for an n-p pair: Wno =r93(X1, X2 N 1 N 2 or = V4(X1, X2)$N(n)N(P2)*  107 If we regard the proton and neutron as different states of the same object, labeled by the "charge or isospin coordinate", q, we must extend the Pauli principle to cover the new coordinate: the total wavefunction is then W(X1, q1; X2' q2) = -1V(X2, q2; Xi qi)- It must be anti-symmetric under the full exchange. For a 2p- or a 2n-pair, the exchange q1- q2 is symmetrical, and therefore the space-spin part must be anti-symmetrical. For an n-p pair, the symmetric (S) and anti-symmetric (AS) "isospin" wavefunctions are I) 4s = (1/V2){$N(pl)N(n2) + PN(n1PN(p2)} (symmetric under qi Hq2), and therefore the space-spin part is anti-symmetrical, II) AX +- e'+e (?-decay)  108 or, we can have AZXN AZ-1 N-1 + e+ Ve ((+ - decay). A related process is that of electron capture of an orbital electron that is sufficiently close to the positively charged nucleus: e + AZ N AZ+1 N+1 +Ve Other related processes are Ve + AZ N A-1 N-1+ e and Ve + A N AZ+1 N-1 + e The decay of the free proton has not been observed at the present time. The experimental limit on the half-life of the proton is > 1031 years. Many current theories of the microstructure of matter predict that the proton decays. If, however, the life-time is > 1032 - 1033 years then there is no realistic possibility of observing the decay directly (The limit is set by Avogadro's number and the finite number of protons that can be assembled in a suitable experimental apparatus). The fundamental (3-decay is that of the free neutron, first observed in 1946. The process is n0-p*+e-+ve0 ,t12= 10-37±0-19 minutes. This measured life-time is of fundamental importance in Particle Physics and in Cosmology. Let us set up an algebraic description of the (3-decay process, recognizing that we have a 2-state system in which the transformation p < n occurs: In the -?-decay of a free neutron  109 n -- p +e+ve, and in the *3+-decay of a proton, bound in a nucleus, p -n+e +ve. 12.2 Isospin of the nucleon The spontaneous transformations p H n observed in (3-decay leads us to introduce the operators T_ that transform p H n: T,$ = p, T,$ = 0, (eliminates a proton) and P_$4p= $i, T_4 = 0, (eliminates a neutron). Since we are dealing with a two-state system, we choose the "isospin" parts of the proton and neutron wavefunctions to be 1 C0 $(p) = and $(n) 0 1 in which case the operators must have the forms: 0 1 0 0 T, = and-t_=. K0 0 1 0 They are singular and non-hermitian. We have, for example 0 1 0 1 0 0 1 0  110 and 0 1 1 0 0 0 0 0 (c+ removes a proton). To make the present algebraic description analogous to the two- state system of the intrinsic spin of the electron, we introduce linear combinations of the t.: +E ='t+ _t _ 0 1 1 0 = 61, a Pauli matrix, and 0 -i T2= i(T - T+) = i 0 A third (diagonal) operator is, as expected = 02, a Pauli matrix. 1 0 T3= = 3,aPaulimatrix. 0 1 The three operators {t1, T2, T3} therefore obey the commutation relations [Ltj/2,'tk/2] = is t,/2  111 where the factor of(1/2) is introduced because of the 2:1 homomorphism between SU(2) and O*(3): the vector operator t =-t/2 is called the isospin operator of the nucleon. To classify the isospin states of the nucleon we may use the projection of t on the 3rd axis, t3. The eigenvalues, t3, of t3 correspond to the proton (t3 = +1/2) and neutron (t3 = -1/2) states. The nucleon is said to be an isospin doublet with isospin quantum number t = 1/2. (The number of states in the multiplet is 2t + 1 = 2 for t = 1/2). The charge, QN of the nucleon can be written in terms of the isospin quantum numbers: QN = q(t3+(1/2)) = qor 0, where q is the proton charge. (It is one of the major unsolved problems of Particle Physics to understand why the charge on the proton is equal to the charge on the electron). 12.3 Isospin in nuclei. The concept of isospin, and of rotations in isospin space, associated with individual nucleons can be applied to nuclei - systems of many nucleons in a bound state. Let the isospin of the ith-nucleon be ti, and let ti = Ti /2. The operator of a system of A nucleons is defined as T = XA t==XA1ti/2. The eigenvalue of T3 of the isospin operator T3 is the sum of the individual components T3 - ti=1 3i Ai=1 t3i/2 = (Z - N)/2 .  112 The charge, QN of a nucleus can be written QN = qXAi=1 (3i + 1)/2 = q(T3 + A/2) . For a given eigenvalue T of the operator T, the state is (2T + 1)-fold degenerate. The eigenvalues T3 of T3 are T3 = -T,-T+1,...0,...T+1, T. If the Hamiltonian H of the nucleus is charge-independent then [H, T] = 0 and T is said to be a good quantum number. In light nuclei, where the isospin-violating coulomb interaction between pairs of protons is a small effect, the concept of isospin is particularly useful. The study of isospin effects in nuclei was first applied to the observed properties of the lowest-lying states in the three nuclei with mass number A = 14:'14C, 14N, and 140. The spin and parity of the ground state of 14C, the first excited state of 14N and the ground state of 140 are measured to be 0+; these three states are characterized by T = 1. The ground state of 14N has spin and parity 1*; it is an isospin singlet (T = 0). The relative energies of the states are shown in the following diagram:  113 Energy (MeV) I 6 4 0+ T= 1,T3=1 0+ T= 1,T3=0 2 0+ T= 1,T3=-1 1+ T=O,T3=0 0 An isospin singlet (T = 0) and an isospin triplet (T = 1) in the A = 14 system. In the absence of the coulomb interaction, the three T = 1 states would be degenerate. 12.4 Isospin and mesons We have seen that it is possible to classify the charge states of nucleons and nuclear isobars using the concept of isospin, and the algebra of SU(2). It will be useful to classify other particles, including field particles (quanta) in terms of their isospin.  114 Yukawa (1935), first proposed that the strong nuclear force between a pair of nucleons is carried by massive field particles called mesons. Yukawa's method was a masterful development of the theory of the electromagnetic field to include the case of a massive field particle. If i, is the "meson wavefunction" then the Yukawa differential equation for the meson is 8,89 i, + (E0/hc)2i, = 0. where anal = (1/c2)a2/8t2 - V2 The r-dependent (spatial) form of V2 is V2 - (1/r2)d/dr(r2d/dr) The static (time-independent) solution of this equation is readily checked to be W(r) = (-g2/r)exp(-r/rN) where rN = h/mJTc = hc/mJTc2 = hc/ET0, so that 1/rN2 = (EJT/hc)2 The "range of the nuclear force" is defined by the condition r = rN = h/mc 2 x10-13 cm. This gives the mass of the meson to be close to the measured value. It is important to note that the "range of the force" oc 1/(mass of the field quantum). In the case of the electromagnetic field, the mass of the field quantum (the photon) is zero, and therefore the force has an infinite range.  115 The mesons come in three charge states: +, -, and 0. The mesons have intrinsic spins equal to zero (they are field particles and therefore they are bosons), and their rest energies are measured to be E_0 = 139-5 MeV and E,00 = 135-6 MeV. They are therefore considered to be members of an isospin triplet: t = 1,t3 =±1,0. In Particle Physics, it is the custom to designate the isospin quantum number by I, we shall follow this convention from now on. The third component of the isospin is an additive quantum number. The combined values of the isospin projections of the two particles, one with isospin projection I3(1) , and the other with I3(2), is 3(1+2) - 3(1) + 3(2) Their isospins combine to give states with different numbers in each multiplet. For example, in pion (meson)-nucleon scattering m + N -- states with I(1 +2) = (3/2) or (1/2). These values are obtained by noting that I(1) = 1, and IN(2) = 1/2, so that I3a(1) + I3N(2) = (1, 0) + (±1/2) = 3/2, an isospin quartet, or = 1/2, an isospin doublet. Symbolically, we write 302 = 4@2. (This is the rule for forming the product (2I31)' + 1)0(213(2) + 1).  116 13 GROUPS AND THE STRUCTURE OF MATTER 13.1 Strangeness In the early 1950's, our understanding of the ultimate structure of matter seemed to be complete. We required neutrons, protons, electrons and neutrinos, and mesons and photons. Our optimism was short-lived. By 1953, excited states of the nucleons, and more massive mesons, had been discovered. Some of the new particles had completely unexpected properties; for example, in the interaction between protons and -mesons (pions) the following decay mode was observed: Proton (p*) Pion (n*) Sigma Kaon (K*) (I*) Pion (W0) Pion (it) Initial interaction lasts ~_10-23 seconds (Strong force acting) Final decay takes ~-10- 0 seconds (Weak force acting) Gell-Mann, and independently Nishijima, proposed that the kaons (heavy mesons) were endowed with a new intrinsic property not affected by the strong force. Gell-Mann called this property "strangeness". Strangeness is conserved in the strong interactions  117 but changes in the weak interactions. The Gell-Mann - Nishijima interpretation of the strangeness-changing involved in the proton- pion interaction is p* (S= 0) *(S=-1) 0 (S = 0) * ~ K' (S =+1) * 7* (S = 0) m* (S = 0) AS =0 AS =1 In the strong part of the interaction, there is no change in the number defining the strangeness, whereas in the weak part, the strangeness changes by one unit. Having defined the values of S for the particles in this interaction, they are defined forever. All subsequent experiments involving these objects have been consistent with the original assignments. 13.2 Particle patterns In 1961, Gell-Mann, and independently Ne'eman, introduced a scheme that classified the strongly interacting particles into family groups. They were concerned with the inclusion of "strangeness" in their theory, and therefore they studied the arrangements of  118 particles in an abstract space defined by their electric charge and strangeness. The common feature of each family was chosen to be their intrinsic spin; the family of spin-1/2 baryons (strongly interacting particles) has eight members: no, p* ,1* Oj ,E- ,° , and A0 . Their strangeness quantum numbers are: S = 0: n°, p* ; S = -1: * , o and A0 ; and S = -2: E° - . If the positions of these eight particles are given in charge-strangeness space, a remarkable pattern emerges: Strangeness 4 n0 p+ 0 -1 -2 E- EO +1 Charge -1 0 There are two particles at the center, each with zero charge and strangeness -1; they are the X0 and the A0. (They have different rest masses). An important set of particles consists of all baryons with  119 spin 3/2. At the time, there were nine known particles in this category: Ao, A1, A.20 1 ,o±u i, and E-1 . They have the following pattern in charge-strangeness space: Charge: -1 0 +1 +2 Strangeness 0 -1 -2 -3 The symmetry pattern of the family of spin-3/2 baryons, shown by the known nine objects was sufficiently compelling for Gell-Mann, in 1962, to suggest that a tenth member of the family should exist.  120 Furthermore, if the symmetry has a physical basis, the tenth member should have spin-3/2, charge -1, strangeness -3, and its mass should be about 150MeV greater than the mass of the °0 particle. Two years after this suggestion, the tenth member of the family was identified in high-energy particle collisions; it decayed via weak interactions, and possessed the predicted properties. This could not have been by chance. The discovery of the Q- particle was crucial in helping to establish the concept of the Gell-Mann - Ne'eman symmetry model. In addition to the symmetries of baryons, grouped by their spins, the model was used to obtain symmetries of mesons, also grouped by their spins. 13.3 The special unitary group SU(3) and particle structure Several years before the work of Gell-Mann and Ne'eman, Sakata had attempted to build-up the known particles from {neutron-proton-lambda°} triplets. The lambda particle was required to "carry the strangeness". Although the model was shown not to be valid, Ikeda et al. (1959) introduced an important mathematical analysis of the three-state system that involved the group SU(3). The notion that an underlying group structure of elementary particles might exist was popular in the early 1960's. (Special Unitary Groups were used by J. P. Elliott in the late 1950's to describe symmetry properties of light nuclei). The problem facing Particle Physicists, at the time, was to find the appropriate group and its fundamental representation, and to construct higher-dimensional representations that would account for the wide variety of symmetries observed in charge-strangeness  121 space. We have seen that the charge of a particle can be written in terms of its isospin, a concept that has its origin in the charge- independence of the nucleon-nucleon force. When appropriate, we shall discuss the symmetry properties of particles in isospin- strangeness space. Previously, we discussed the properties of the Lie group SU(2). It is a group characterized by its three generators, the Pauli spin matrices. Two-state systems, such as the electron with its quantized spin-up and spin-down, and the isospin states of nucleons and nuclei, can be treated quantitatively using this group. The symmetries of nucleon and meson families discovered by Gell- Mann and Ne'eman, implied an underlying structure of nucleons and mesons. It could not be a structure simply associated with a two-state system because the observed particles were endowed not only with positive, negative, and zero charge but also with strangeness. A three-state system was therefore considered necessary, at the very least; the most promising candidate was the group SU(3). We shall discuss the infinitesimal form of this group, and we shall find a suitable set of generators. 13.3.1 The algebra of SU(3) The group of special unitary transformations in a 3- dimensional complex space is defined as SU(3) -{U33 : UUt = I, detU = +1, us E C}. The infinitesimal form of SU(3) is SU(3)if =I+ i&aX /2 ,j = 1to 8. (There are n2 - 1 = 8 generators).  122 The quantities tai are real and infinitesimal, and the 3x3 matrices A are the linearly independent generators of the group. The repeated index, j, means that a sum over j is taken. The defining properties of the group restrict the form of the generators. For example, the unitary condition is UUt = (I + iba X?/2)(I - i&a Xt /2) = I - iba A */2 + i&ax? /2 to 1st-order, The generators must be hermitian. The determinantal condition is det = +1; and therefore Tr = 0. The generators must be traceless. The finite form of U is obtained by exponentiation: U = exp{iaAX/2}. We can find a suitable set of 8 generators by extending the method used in our discussion of isospin, thus: Let three fundamental states of the system be chosen in the simplest way, namely: 1 0 0 u= 0 , v= 1 ,andw = 0 0 0 1 If we wish to transform v -- u, we can do so by defining the operator A,: 10 1 0 0 1 Av=u, 0 0 0 1= 0. 0 00 0 0  123 We can introduce other operators that transform the states in pairs, thus 0 0 0 A_ = 1 0 0 , 0 0 0 B ) 0 0 0 0 0 B, = 0 0 1 , B_= 0 0 0 , 000 01 0 0 0 0 0 0 1 C,= 0 0 0, C_ = 0 0 0. 1 0 0 0 0 0 These matrices are singular and non-hermitian. In the discussion of isospin and the group SU(2), the non-singular, traceless, hermitian matrices t-1, and T2 are formed from the raising and lowering operators or± matrices by introducing the complex linear combinations '1= r+,+T_ =61 and-t2 = i(t1 - T2) =02. The generators of SU(3) are formed from the operators A, B, C± by constructing complex linear combinations. For example: the isospin operator T1 = 01 = T, + T_, a generator of SU(2), becomes 0 61 0 = A, + A_ -=X1, a generator of SU(3). 0 0 0 Continuing in this way, we obtain A,= X1/2 + iX2/2,  124 where 0 X2 = 02 0 0 0 0 and C, + C_ 4= 4, C, - C_ = -i%, B++B_+ =6, B ,-B_ = iX7. The remaining generators, X, and X, are traceless, diagonal, 3x3 matrices: 0 1 0 0 X3= 03 0 ,X8= 0 1 0. 0 0 0 0 0 -2 The set of matrices {1,.....X8} are called the Gell-Mann matrices, introduced in 1961. They are normalized so that Tr(?Xsk) = 25 . The normalized form of X8 is therefore 1 0 0 '%g = (1/V3) 0 1 0 0 0 -2 If we put F1 = x,/2, we find A =F1±iF2, B =F6±iF7, and C= F4 -iF5.  125 Let A3 = F3, B3 = -F3/2 + (v3/4)F8 , and C3 = (-1/2)F3 - (v 3/4)F8, so that A3 + B3 + C3 = 0. The last condition means that only eight of the nine operators are independent. The generators of the group are readily shown to obey the Lie commutation relations [Fj, F,] = ifijkFk , i,j,k = 1to 8. where the quantities f are the non-zero structure constants of the group; they are found to obey f --f and the Jacobi identity. The commutation relations [Fi, Fj] can be written in terms of the operators A, ...Some typical results are [A+, A_] = 2A3, [A+, A3] = -A,, [A_, A3] = +A_, [A3, B3] = 0, [A3, C3] = 0, [B3,C3] = 0 [B+, B_] = 2B3, [B+, B3] = -B_, [B_, B3] = +B_ etc. The two diagonal operators commute: [F3, F8] =0. The operators F1, F2, and F3 contain the 2x2 isospin operators (Pauli matrices), each with zeros in the third row and column; they obey the commutation relations of isospin. We therefore make the identifications F1 = I1, F2 = I2, and F3 = I3 where the Ii's are the components of the isospin. Particles that experience the strong nuclear interaction are called hadrons; they are separated into two sets: the baryons with  126 half-integer spins and the mesons with zero or integer spins. Particles that do not experience the strong interaction are called leptons. In order to quantify the difference between baryons and leptons, it has been found necessary to introduce the baryon number B = +1 to denote a baryon, B = -1to denote an anti-baryon, and B = 0 for all other particles. Leptons are characterized by the lepton number L = +1, anti-leptons are assigned L = -1, and all other particles are assigned L = 0. It is a present-day fact, based upon numerous observations, that the total baryon and lepton number in any interaction is conserved. For example, in the decay of the free neutron we find n0 =p++ e- +Ve0 B=+1=+1+ 0 + 0 L= 0=0+1 +(-1). The fundamental symmetries in Nature responsible for these conservation laws are not known at this time. These conservation laws may, in all likelihood, be broken. In discussing the patterns of baryon families in charge- strangeness space, we wish to incorporate the fact that we are dealing with baryons that interact via the strong nuclear force in which isospin and strangeness are conserved. We therefore choose to describe their patterns in isospin-hypercharge space, where the hypercharge Y is defined to include both the strangeness and the baryon attribute of the particle in an additive way: Y=B+S. The diagonal operator F8 is therefore assumed to be directly associated with the hypercharge operator: F8 = (V3/2)Y.  127 Because 13 and Y commute, states can be chosen that are simultaneous eigenstates of the operators F3 and F8. Since no other SU(3) operators commute with I3 and Y, no other additive quantum numbers are associated with the SU(3) symmetry. The operators F4, ... F8 are considered to be new constants-of-the-motion of the strong interaction Hamiltonian. 13.4 Irreducible representations of SU(3) In an earlier discussion of the irreducible representations of SU(2), we found that the commutation relations of the generators of the group were satisfied not only by the fundamental 2x2 matrices but also by matrices of higher dimension [(2J + 1) O (2J + 1)], where J can have the values 1/2, 1, 3/2, 2,...The J-values correspond to the spin of the particle whose state is given by a spinor (a column vector with special transformation properties). In the 2x2 representation, both covariant and contravariant spinors are allowed: i) covariant spinors (with lower indices) are written as 2- component columns that transform under U E SU(2) as a;' = U'a , where al a =, a2 and ii) contravariant spinors (with upper indices) are written as 2-component rows that transform as:  128 s3J' = si Ui", where = (b',b2). The co- and contravariant spinors are transformed with the aid of the anti-symmetric tensors ei and E1. For example, si= J transforms as a covariant spinor with the form b2 -bl The higher-dimensional representations are built up from the fundamental form by taking tensor products of the fundamental spinors ai , si , or i and by symmetrizing and anti-symmetrizing the result. We state, without proof, the theorem that is used in this method: when a tensor product of spinors has been broken down into its symmetric and anti-symmetric parts, it has been decomposed into irreducible representations of the SU(n). (See Wigner's standard work for the original discussion of the method, and de Swart in Rev. Mod. Phys. 35, (1963) for a detailed discussion of tensor analysis in the study of the irreps of SU(n)) As an example, we write the tensor product of two covariant spinors  129 and v, in the following way Ov v = ( + i+ vi)/2 + ( v - vi)/2 There are four elements associated with the product (ij can have values 1 and 2). The symmetric part of the product has three independent elements, and transforms as an object that has spin J=1. (There are 2J + 1 members of the symmetric set). The anti-symmetric part has one element, and therefore transforms as an object with spin J = 0. This result is familiar in the theory of angular momentum in Quantum Mechanics. The explicit forms of the four elements are: J3=+1: 1v1 J = 1 J3 = 0: (1/V2)( 1v2 + 12v1) J -1:112vi and J = 0 J3 = 0 : (1//2)( 1v2 - F2vi). Higher-dimensional representations are built up from the tensor products of covariant and contravariant 3-spinors, a and I respectively. The products are then written in terms of their symmetric and anti-symmetric parts in order to obtain the irreducible representations. For example, the product a3 , i,j = 1,2,3, can be written aiV = (aiI3' - (1/3)isa3') + (1/3)8iJajp', in which the trace has been separated out. The trace is a zero-rank tensor with a single component. The other tensor is a traceless, symmetric tensor with eight independent components. The decomposition is written symbolically as: 3 03 = 8 e1.  130 We can form the tensor product of two covariant 3-spinors, y as follows: tiv = (1/2)( tvj + + (1/2)( tvj - vi),i,j = 1,2,3. Symbolically, we have 303 = 6@3, in which the symmetric tensor has six components and the anti- symmetric tensor has three components. Other tensor products that will be of interest are 30303= 10080801, and 808 = 27 0 10 0 10 0 8 0 8' 1. The appearance of the octet "8" in the 3 0 3 decomposition (recall the observed octet of spin-1/2 baryons), and the decuplet "10" in the triple product 3 0 3 0 3 decomposition (recall the observed decuplet of spin-3/2 baryons), was of prime importance in the development of the group theory of "elementary" particles. 13.4.1 Weight diagrams Two of the Gell-Mann matrices, X3 and X 8, are diagonal. We can write the eigenvalue equations: ?,u --=auu, X v = Qav, and ?,3w=a~w, and =8 --=pu, X8v - pI3v, and X8w =pw , where a and i are the eigenvalues. Let a and b be normalization factors associated with the operators X3 and 8 , repectively, so that  131 a 0 0 b 0 0 N -a 0 andX8N= 0 b 0 0 0 0 K0 0-2b If u = i, 0, 0],v = [0, 1, 0] and w= LO,[0, 1] (columns), we find 3N au, X8NU= bu, X 3NV = -av, X8NV = by, X3NW = Ow, X8NW = -2bw. The weight vectors are formed from the pairs of eigenvalues: [a,, 1u] = a,b], [a,, I\] = [-a, b], [1a, I1] = [0, -2b]. A weight diagram is obtained by plotting these vectors in the a-(3 space: 2b -a a a -b - -2b This weight diagram for the fundamental "3" representation of SU(3) was well-known to Mathematicians at the time of the first  132 use of SU(3) symmetry in Particle Physics. It was to play a key role in the development of the quark model. 13.5 The 3-quark model of matter Although the octet and decuplet patterns of hadrons of a given spin and parity emerge as irreducible representations of the group SU(3), major problems remained that resulted in a great deal of scepticism concerning the validity of the SU(3) model of fundamental particles. The most pressing problem was: why are there no known particles associated with the fundamental triplets 3, 3 of SU(3) that exhibit the symmetry of the weight diagram discussed in the last section? In 1964, Gell-Mann, and independently, Zweig, proposed that three fundamental entities do exist that correspond to the base states of SU(3), and that they form bound states of the hadrons. That such entities have not been observed in the free state is related to their enormous binding energy. The three entities were called quarks by Gell-Mann, and aces by Zweig. The Gell-Mann term has survived. The anti-quarks are associated with the conjugate 3 representation. The three quarks, denoted by u, d, and s (u and d for the up- and down-isospin states, and s for strangeness) have highly unusual properties; they are Label B Y I 13 Q=13+Y/2 S =Y-B u 1/3 1/3 1/2 +1/2 +2/3 0 d 1/3 1/3 1/2 -1/2 -1/3 0 s 1/3 -2/3 0 0 -1/3 -1 s -1/3 2/3 0 0 +1/3 +1 d -1/3 -1/3 1/2 +1/2 +1/3 0 u -1/3 -1/3 1/2 -1/2 -2/3 0  133 The quarks occupy the following positions in I3- Y space Y s d. .u L I _ sI 13 3 d u These diagrams have the same relative forms as the 3 and 3 weight diagrams of SU(3). The baryons are made up of quark triplets, and the mesons are made up of the simplest possible structures, namely quark-anti- quark pairs. The covariant and contravariant 3-spinors introduced in the previous section are now given physical significance: p = [u, d, s], a covariant column 3- spinor, and v = (u, d, s), a contravariant row 3- spinor. where u = [1, 0, 0], d = [0, 1, 0], and s = [0, 0, 1] represent the unitary symmetry part of the total wavefunctions of the three quarks. The operators A, B, and C_ are now viewed as operators that transform one flavor (type) of quark into another flavor:  134 A_ = I±(I3) II3±1, B+ = U±(U3) - U3 ± 1, called the U-spin operator, and C_ = V±(V3) - V3 ± 1, called the V-spin operator, where I,(-1 /2) - 1 /2 : d - u I_(+1/2) - -1/2 : u - d U,(-1/2) - 1/2 : s - d U_(+1/2) - -1/2 : d - s V,(-1/2) - 1/2 : u - s V_(+1/2) - -1/2 : s - u. Quarks can be characterized by the quantum numbers 13, U3, V3 -V3 d u -I3 +1/2 13 12) V3 -U3 The members of the octet of mesons with JP = 0- are formed from qq-pairs that belong to the fundamental 3, 3 representation of the  135 quarks. The Tr and 3O mesons are linear combinations of the qq states, thus Y s ds u - dii . x ' ud r.* -1 +1 13 d K su - 4 M The nonet formed from the tensor product 3 @ 3 is split into an octet that is even under the label exchange of two particles, and a singlet that is odd under label exchange: 3@3 = 801 where the "1" is T1' = (1/13)(uu + dd + ss), and the two members of the octet at the center are: TO= (1/12)(uu - dd) and rI = (1/16)(uu+ dd - 2ss).  136 The action of I_ on o* is to transform it into a in0. This operation has the following meaning in terms of I_ acting on the tensor product, u d: I_(u 0 d)- (I u) 0 d + u 0 (Id) (c.f. derivative rule) I_(n)= d Od+u 0 u Omitting the tensor product sign, normalizing the amplitudes, and choosing the phases in the generally accepted way, we have: 7c° = (1/2)(uu - dd). The singlet q°' is said to be orthogonal to 7° and q° at the origin. If the symmetry of the octet were exact, the eight members of the octet would have the same mass. This is not quite the case; the symmetry is broken by the difference in effective mass between the u- and d-quark (essentially the same effective masses: ~-300 MeV/c2) and the s-quark (effective mass ~ 500 MeV/c2). (It should be noted that the effective masses of the quarks, derived from the mass differences of hadron-pairs, is not the same as the "current- quark" masses that appear in the fundamental theory. The discrepancy between the effective masses and the fundamental masses is not fully understood at this time). The decomposition of 3 0 3 0 3 is 303 0 3 = (6 ( 3) 0 3 = 10E808'E1 in which the states of the 10 are symmetric, the 1 is antisymmetric, and the 8, 8' states are of mixed symmetry. The decuplet that appears in this decomposition is associated with the observed  137 decuplet of spin-3/2 baryons. In terms of the three fundamental quarks - u, d, and s, the make -up of the individual members of the decuplet is shown schematically in the following diagram: ddd dud uud uuu dds dus uus sds sus sss The precise make-up of each state, labeled by (Y, I, I3,) is: (1, 3/2, +3/2) = uuu(**) (1, 3/2, +1/2) = (1/V3)(udu + duu + uud) (1, 3/2, -1/2) = (1/V3)(ddu + udd + dud) (1,3/2, -3/2) = ddd(-) (0, 1, +1) = (1/3)(usu + suu + uus) (0, 1, 0) = (1/V6)(uds + dsu + sud + dus + sdu + usd) (0,1,-i) = (1/V3)(dsd + sdd + dds) (-1, 1/2, +1/2) = (1/V3)(ssu + uss + sus) (-1, 1/2, -1/2) = (1/V3)(ssd + dss + sds) (-2, 0, 0) = sss(-)  138 The general theory of the permutation group of n entities, and its representations, is outside the scope of this introduction. The use of the Young tableaux in obtaining the mixed symmetry states is treated in Hamermesh (1962). The charges of the A**, A-, and Q- particles fix the fractional values of the quarks, namely quark flavor charge (in units of the electron charge) u +2/3 d -1/3 s -1/3 The charges of the anti-quarks are opposite in sign to these values. Extensive reviews of the 3-quark model and its application to the physics of the low-energy part of the hadron spectrum can be found in Gasiorowicz (1966) and Gibson and Pollard (1976). 13.6 The need for a new quantum number: hidden color Immediately after the introduction of the 3-quark model by Gell-Mann and Zweig, it was recognized that the model was not consistent with the extended Pauli principle when applied to bound states of three quarks. For example, the structure of the spin-3/2 A* state is such that, if each quark is assigned a spin sq = 1/2, the three spins must be aligned t t t to give a net spin of 3/2. (It is assumed that the relative orbital angular momentum of the quarks in the A* is zero (a symmetric s-state) - a reasonable assumption to make, as it corresponds to minimum kinetic energy, and therefore to a state of lowest total energy). The quarks are fermions, and therefore they must obey the generalized Pauli Principle; they cannot exist in a completely aligned spin state when they are in an s-state that is  139 symmetric under particle (quark) exchange. The unitary spin component of the total wavefunction must be anti-symmetric. Greenberg (1964) proposed that a new degree of freedom must be assigned to the quarks if the Pauli Principle is not to be violated. The new property was later called "color", a property with profound consequences. A quark with a certain flavor possesses color (red, blue, green, say) that corresponds to the triplet representation of another form of SU(3) - namely SU(3)c, where the subscript C differentiates the group from that introduced by Gell-Mann and Zweig - the flavor group SU(3)F. The anti-quarks (that possess anti-color) have a triplet representation in SU(3)c that is the conjugate representation (the 3). Although the SU(3)F symmetry is known not to be exact, we have evidence that the SU(3)c symmetry is an exact symmetry of Nature. Baryons and mesons are found to be colorless; the color singlet of a baryon occurs in the decomposition SU(3)c=30 303=10+8+8'+1. The meson singlets consist of linear combinations of the form 1 = (RR + BB + GG)/V3. Although the hadrons are colorless, certain observable quantities are directly related to the number of colors in the model. For example, the purely electromagnetic decay of the neutral pion, i°, into two photons has a lifetime that is found to be closely proportionl to the square of the number of colors. (Adler (1970) gives F = hit = 1(eV) (number of colors)2  140 The measurements of the lifetime give a value of F~-8 eV, consistent with Nc01s = 3. Since these early measurements, refined experiments have demonstrated that there are three, and only three, colors associated with the quarks. In studies of electron-positron interactions in the GeV- region, the ratio of cross sections: R = 6(e~e -- hadrons)/6(e~e -- *4-) is found to depend linearly on the number of colors. Good agreement between the theoretical model and the measured value of R, over a wide range of energy, is obtained for three colors. The color attribute of the quarks has been responsible for the development of a theory of the strongly interacting particles, called quantum chromodynamics. It is a field theory in which the quarks are generators of a new type of field - the color field. The mediators of the field are called gluons; they possess color, the attribute of the source of the field. Consequently, they can interact with each other through the color field. This is a field quite unlike the electrodynamic field of classical electromagnetism, in which the field quanta do not carry the attribute of the source of the field, namely electric charge. The photons, therefore, do not interact with each other. The gluons transform a quark of a particular color into a quark of a different color. For example, in the interaction between a red quark and a blue quark, the colors are exchanged. This requires that the exchanged gluon carry color and anti-color, as shown:  141 qb q gluon, grb carries red and anti-blue: qr qb The color lines are continuous. Three different colors permit nine different ways of coupling quarks and gluons. Three of these, red-red, blue-blue, and green- green do not change the colors. A linear combination ~ (R-R + B-B + G-G) is symmetric in the color labels, and this combination is the singlet state of the group SU(3)c. Eight gluons, each with two color indices, are therefore required in the 3-color theory of quarks. 13.7 More massive quarks In 1974, the results of two independent experiments one, a study of the reaction p + Be -- e* + e ... (Ting et al.), the other a study of e* + e -- hadrons ... (Richter et al), showed the presence of a sharp resonance at a center-of-mass energy of 3.1 GeV. The lifetime of the resonant state was found to be ~10-20 seconds - more than 103 seconds longer than expected for a state formed in the strong interaction. The resonant state is called the J/p. It was quickly realized that the state corresponds to the ground state of a new quark-anti-quark system, a bound state cc, where c is a fourth,  142 massive, quark endowed with one unit of a new quantum number c, called "charm". The quantum numbers assigned to the c-quark are jP = 1/2*, c = 1, Q/e = +2/3, and B = 1/3. Sound theoretical arguments for a fourth quark, carrying a new quantum number, had been put forward several years before the experimental observation of the J/ip state. Since 1974, a complex set of states of the "charmonium" system has been observed, and their decay properties studied. Detailed comparisons have been made with sophisticated theoretical models of the system. The inclusion of a charmed quark in the set of quarks means that the group SU(4)F must be used in place of the original Gell- Mann-Zweig group SU(3)F. Although the SU(4)F symmetry is badly broken because the effective mass of the charmed quark is 1.8 GeV/c2, some useful applications have been made using the model. The fundamental representations are [u, d, s, c], a covariant column spinor, and (u, d, s, c), a contravariant row spinor. The irreps are constructed in a way that is analogous to that used in SU(3)F, namely, by finding the symmetric and anti-symmetric decompositions of the various tensor products. The most useful are: 404 = 15 0 1, 4 04 = 10 6, 4 0 4 0 4 = 20sym O20mix 20'mix O4anti, and 15 0 15 = 1 EO15sym 15anti ( 20sym (45 0+45 0+84.  143 The "15" includes the non-charmed (JP = 0- ) mesons and the following charmed mesons: D° = cu, D =cu, mass = 1863MeV/c2, D* = cd, D- = cdmass = 1868 MeV/c2, F* = cs, F- = cs, mass = 2.04 MeV/c2. In order to discuss the baryons, it is necessary to include the quark spin, and therefore the group must be extended to SU(8)F. Relatively few baryons have been studied in detail in this extended framework. In 1977, well-defined resonant states were observed at energies of 9.4, 10.01, and 10.4 GeV, and were interpreted as bound states of another quark, the "bottom" quark, b, and its anti-partner, the b. Mesons can be formed that include the b-quark, thus B= bu, B0 = bd, B0 = bs, and Be = bc. The study of the weak decay modes of these states is currently fashionable. In 1994, definitive evidence was obtained for the existence of a sixth quark, called the "top" quark, t. It is a massive entity with a mass almost 200 times the mass of the proton. We have seen that the quarks interact strongly via gluon exchange. They also take part in the weak interaction. In an earlier discussion of isospin, the group generators were introduced by considering the (3-decay of the free neutron, n0 -p + e- + v0. We now know that, at the microscopic level, this process involves the transformation of a d-quark into a u-quark, and the production of the carrier of the weak force, the massive W- particle. The W-  144 boson (spin 1) decays instantly into an electron-anti-neutrino pair, as shown: -o W -1 e- d u neutron, no d(-1/3) - u(+2/3) proton, p+ uu d d The carriers of the Weak Force, W*, Z°, were first identified in p-p collisions at high center-of-mass energy. The processes involve quark-anti-quark interactions. e+ e Z° u(+2/3) u (-2/3) u(+2/3) d(- 1/3) e+ 1 W+ v0 d(+1/3) -o v W- e- u(-2/3) The charge is conserved at each vertex. The carriers have very large measured masses: mass W* ~ 81 GeV/c2, and mass Z°~ 93 GeV/c2.  145 (Recall that the range of a force oc 1/(mass of carrier); the W and Z masses correspond to a very short range, ,0-18 m, for the Weak Force). Any quantitative discussion of current work using Group Theory to tackle Grand Unified Theories, requires a knowledge of Quantum Field Theory that is not expected of readers of this introductory book. 14 LIE GROUPS AND THE CONSERVATION LAWS OF THE PHYSICAL UNIVERSE 14.1 Poisson and Dirac Brackets The Poisson Bracket of two differentiable functions A(pi , p2, ---pn , qi, q2, ---qn) and B(pi, p2, ---pn, qi, q2, ---qn) of two sets of variables (pi, p2, ...pn) and (q1, q2, ...qn) is defined as {A, B} = 1" (BA/q)(BB/Bp) - (BA/Bp)(BB/q). If A = O(pi, qi), a dynamical variable, and B = H(pi, qi), the hamiltonian of a dynamical system, where pi is the (canonical) momentum and qi is a (generalized) coordinate, then {O, H} = 11" (BO/q)(BH/Bp) - (BO/Bp)(BH/q). (n is the"number of degrees of freedom" of the system). Hamilton's equations are BH/api = dqi/dt and BH/aqi = - dpi/dt , and therefore {O, H} = X 1" (BO/Bqi)(dq/dt) + (BO/Bqi)(dpi/dt) .  146 The total differential of O(pi, qi) is dO = X 1" (BO/Bq)dqi + (BO/Bpi)dpi. and its time derivative is (dO/dt) = X1" (BO/Bqi)(dq/dt) + (BO/Bpi)(dpi/dt) ={O, H} = O. If the Poisson Bracket is zero, the physical quantity 0 is a constant of the motion. In Quantum Mechanics, the relation (dO/dt) = {O, H} is replaced by (dO/dt) = -(i/h))[O, H], Heisenberg' s equation of motion. It is the custom to refer to the commutator L0, H] as the Dirac Bracket. If the Dirac Bracket is zero, the quantum mechanical quantity 0 is a constant of the motion.. (Dirac proved that the classical Poisson Bracket {O, H} can be identified with the Heisenberg commutator -(i/h)[O, H] by making a suitable choice of the order of the q's and p's in the Poisson Bracket). 14.2 Infinitesimal unitary transformations in Quantum Mechanics The Lie form of an infinitesimal unitary transformation is U = I + i&aX/h , where a ia real infinitesimal parameter, and X is an hermitian operator. (It is straightforward to show that this form of U is, indeed, unitary).  147 Let a dynamical operator 0 change under an infinitesimal unitary transformation: O -- O' = UOU-1 = (I + ioaX/h)O(I - ioaX/h) = 0 - ioaOX/h + ioaX0/h to 1st-order = 0 + i(8aX0 - 0aX)/h = 0 + i(FO - OF)/h. where F = baX. The infinitesimal change in 0 is therefore 8o=o--O = i[F, O]/h If we identify F with -Ht (the classical form for a purely temporal change in the system) then 80 = i[-Ht, O]/h, or -80 = i[H, O]t/h, so that -8O/8t = i[H, O]/h. For a temporal change in the system, 8O/8t = - dO/dt. The fundamental Heisenberg equation of motion dO/dt = i[H ,O]/h is therefore deduced from the unitary infinitesimal transformation of the operator O. This approach was taken by Schwinger in his formulation of Quantum Mechanics.  148 IFI = Hit is directly related to the generator, X, of a Quantum Mechanical infinitesimal transformation, and therefore we can associate with every symmetry transformation of the system an hermitian operator F that is a constant of the motion - its eigenvalues do not change with time. This is an example of Noether's Theorem: A conservation law is associated with every symmetry of the equations of motion. If the equations of motion are unchanged by the transformations of a Group then a property of the system will remain constant as the system evolves with time. As a well-known example, if the equations of motion of an object are invariant under translations in space, the linear momentum of the system is conserved.  149 15 BIBLIOGRAPHY The following books are typical of those that are suitable for Undergraduates: Armstrong, M. A., Groups and Symmetry, Springer-Verlag, New York, 1988. Burns, Gerald, Introduction to Group Theory, Academic Press, New York, 1977. Fritzsch, Harald, Quarks: the Stuff of Matter, Basic Books, New York, 1983. Jones, H. F., Groups, Representations and Physics, Adam Hilger, Bristol, 1990. The following books are of a specialized nature; they are typical of what lies beyond the present introduction. Carter, Roger; Segal, Graeme; and Macdonald, Ian, Lectures on Lie Groups and Lie Algebras, Cambridge University Press, Cambridge, 1995. Commins, E. D., and Bucksbaum, P. H., Weak Interactions of Leptons and Quarks, Cambridge University Press, Cambridge, 1983 Dickson, L. H., Linear Groups, Dover, New York, 1960. Eisenhart, L. P., Continuous Groups of Transformations, Dover, New York, 1961. Elliott, J. P., and Dawber, P. G., Symmetry in Physics, Vol.1, Oxford University Press, New York, 1979. Gell-Mann, Murray, and Ne'eman, Yuval, The Eightfold Way, Benjamin, New York, 1964.  150 Gibson, W. M., and Pollard, B. R., Symmetry Principles in Elementary Particle Physics, Cambridge University Press, Cambridge, 1976. Hamermesh, Morton, Group Theory and its Applications to Physical Problems, Dover, New York, 1989. Lichtenberg, D. B., Unitary Symmetry and Elementary Particles, Academic Press, New York, 1978. Lipkin, Harry J., Lie Groups for Pedestrians, North-Holland, Amsterdam, 1966. Lomont, J. S., Appplications of Finite Groups, Dover, New York, 1993. Racah, G., Group Theory and Spectroscopy, Reprinted in CERN(61-68), 1961. Wigner, E. P., Group Theory and its Applications to the Quantum Mechanics of Atomic Spectra, Academic Press, New York, 1959.